How to install an oven. How to connect a gas oven

Gas ovens can be dependent or independent. The only difference is the location of the control panel. Gas connection oven It is possible to do it yourself if you have minimal knowledge in the field of electrical engineering, physics, gas supply and the presence of adjustable wrenches and other tools in your hands.

There are several stages of device installation:

• electrical connection;
• connection to the gas supply system;
• installing it in a kitchen set;
• checking for gas leaks;
• testing.

The oven is installed in well-ventilated rooms equipped with a hood or electric fan. In this case, the main condition for the normal functioning of a household appliance is the presence of proper air circulation around the oven. That's why connection household appliances This type is associated with certain features.

Before installing the device, remove the back wall kitchen set, and install the oven itself on a couple of bars fixed at some distance from the floor inside the furniture. Another nuance is related to the high heating temperature of the device. The material from which all furniture adjacent to the oven is made must withstand a heating temperature of at least 120° C.

Unpack the device and carefully inspect it for mechanical damage. If you find something right away, please contact the seller.

Electrical connection

If your valuable purchase has an electric ignition system, grill function, fan, control panel, etc., then connection to the power supply system is mandatory. The kitchens of modern houses are equipped with special sockets with grounding for connection electric stoves. Other electrical household appliances are also connected to it.

Otherwise, it is necessary to lay an additional three-core power cable from the panel, in which a 16 A residual current device is installed. Connecting household appliances occurs at a socket with mandatory grounding. Do not forget that all work is carried out with the mains voltage turned off and using insulated tools.

Some gas oven manufacturers do not include a power cable, so you will have to do this yourself. Open the connection box located on the rear panel. Loosen the screws on the terminals. Secure the cord wires with screws, following the instructions supplied with the oven. Replace the connection box cover.

Remember that when you spend gas oven connection to the power supply, the cord must be positioned so that its maximum heating temperature does not exceed 70° C. Never use double sockets or extension cords. They may cause short circuits and fire. Before cleaning the oven, disconnect it from the power supply by removing the plug from the socket.

Connection to the gas supply system

Experts advise using the services of a qualified technician to connect gas to the oven, since inept actions or inattention can lead to disastrous consequences.

Please note that when installing a gas hob and oven at the same time to a gas pipe, you must use two connection branches with different gas shut-off valves. Before proceeding further, install a dielectric gasket after the tap to break the electrical network.

There are two types of connection to the central gas supply system:

• through inflexible copper or steel pipe;
• through a bellows hose.

In the first case, the gas supply pipe is located very close to the location of the oven. Typically, the gas outlet of the device is adapted to connect a ½-inch pipe with an external thread. The bellows hose is connected to the same outlet. After installation, make sure that it is not pinched anywhere or touches moving objects.

There are several rules that must be strictly observed when making connection of household appliances. There should be as few adapters and connections as possible, ideally two (at the oven inlet and the valve). The length of the hose cannot exceed 2000 cm and it is not recommended to extend it.

Checking for gas leaks

A proven method that has been proven over the years will help you determine gas leaks at home. Take a shaving brush (used to be used when shaving) and use it to apply soap suds to the hoses and all connections. If the soap foams somewhere, it means gas is penetrating into the room. Fix the leak.

At the final stage of installation, the operation of all functions declared by the manufacturer is checked. To do this, remove all protective stickers and films from the internal and external surfaces of the oven. Plug in the oven (make sure the RCD in the electrical panel is turned on). Provide gas supply. Light up the gas oven.

Cost of connection work - 1,250 rubles. Static. No additional charges (except for materials).

If you decide to purchase a built-in gas oven, the next step for you is to install it. As mentioned above, the installation of such a device has certain difficulties associated with the need to separately connect the oven and hob. It should also be remembered that when installing a gas oven, the manufacturer's requirements specified in the technical manual must be strictly observed. Otherwise, the consumer risks losing the warranty on the equipment. However, the greatest danger is that poor-quality installation can lead to a gas leak and a fire or even an explosion in the apartment. For these and many other reasons, installation of gas equipment, in particular gas ovens, should only be carried out by professionals.

Ovens are well known to domestic consumers as an integral part of free-standing kitchen stoves. However, with the advent of built-in appliances, this piece of kitchen equipment is increasingly considered as a separate element. And it’s not surprising, because a built-in oven is beautiful, convenient and practical. However, it is worth noting that the presence of two devices, an oven and a hob, instead of one adds installation hassle. Moreover, initially in almost all apartments the gas supply system is designed to connect only one device.

Example of a built-in oven

Built-in gas ovens are significantly less popular than their electric counterparts, primarily because electric ovens are more convenient to use and have more useful features. However, in some cases, using electric ovens can be difficult, mainly due to the high power of these appliances. The only way out of this situation is to install a gas oven. In addition, gas ovens today are more economical - gas costs less than electricity, especially when the oven is used intensively.

Set of dependent hob and built-in oven

By turning to Profigaz for help in installing a built-in oven, you can be sure that you will receive a guarantee of the quality of the services provided for a reasonable price. Profigaz is a specialized service company for the installation and maintenance of gas equipment, which has all Required documents to carry out this type of work, has passed the registration procedure with the city gas inspection and has qualified personnel on staff, who are re-certified twice a year at the city training center.

Almost all Profigaz foremen are former or current employees of state gas structures and, in addition to knowledge and qualifications, have serious experience practical work. Also, our specialists are additionally trained in specialized centers of Ariston, Gorenje, Mora, Bosch and others, so regardless of the complexity of the oven design, its installation will not take much time, so very soon after the purchase you can proudly enjoy your own culinary masterpieces!

An unconditional attribute of a modern kitchen is a stove and oven. A wide selection of a wide variety of models allows you to purchase exactly the model that fits perfectly into your kitchen design. But the appearance of the equipment is not the most significant parameter by which an oven and hob are selected. The type of fuel on which the device operates is of decisive importance. Today, stores offer two options for stoves: gas-powered and electric. Gas appliances are incredibly popular, although electric stoves do not leave modern housewives indifferent.

Connection secrets

And so the choice was made in favor of a gas oven and hob. All that remains is to connect the device to the gas supply. Experts who work with gas appliances strongly recommend involving professionals in the installation of appliances. Because careless, unqualified actions can easily lead to disastrous results. If you need to connect a gas panel and an oven at the same time, you should use two fuel supply tubes, each of which is equipped with an individual tap that allows you to stop the supply at any time.

To connect equipment to the gas supply, two types of connecting elements are used:

• A rigid tube made of steel or copper.
• Flexible hose.

The connection is made through the outlet located close to the oven. After finishing installation work, it is necessary to make sure that the connecting pipe is not kinked anywhere and that the flow of fuel is ensured unhindered.

To power the gas oven, remember that the connecting hose cannot be more than two meters long. In this case, the number of connections should be used to a minimum. Compliance with these rules will allow you to connect a gas stove efficiently and quickly.

Installation work

First of all, you need to determine the type of oven and hob. These elements can be dependent on each other and autonomous. If the first option is chosen, two elements are placed in one niche. In the autonomous version, the hob can be installed in the center of the unit, and the oven in any convenient place where the gas supply hose can be reached.

Connecting the gas oven cabinet and starting it up begins with installing the equipment in the niche of the unit. To do this, the back panel of the niche must be removed and the oven placed on two bars that are pre-attached to the surface of the furniture set. This will ensure ventilation of the oven and niche to avoid fire. Next we connect the electricity. This is necessary for the operation of the fan, electrical control panel and other mains powered functions.

The next stage is connecting to the gas supply system. This installation stage involves connecting the oven cabinet and gas pipe using a hose. It is also necessary to connect the hob to the gas pipeline. In this case, you can use a welded pipe connection. Before starting work, do not forget to turn off the gas supply to your house or apartment.

After the gas oven and hob are connected to the fuel supply, it is necessary to configure all the functions of the equipment, check the functionality of the burners and the gas control system. The valve responsible for the gas supply is subject to checking and adjustment.

You need to know that gas hobs can be connected to those sections of the pipeline that are located after the valve that regulates the fuel supply. Before this tap, inserting devices is strictly prohibited. This type of work must be approved by the gas service and included in your home plan.

Detailed instructions for connecting a gas hob and oven are presented in the video.

We follow safety rules

When connecting the oven to the power supply, remember that the wire should never come into contact with the gas pipe. The maximum heating temperature of the conductor should not be higher than 70 0 C. It is prohibited to use extension cords, double or triple sockets. All additional wires and connections may cause a fire. Before you start cleaning the oven cabinet, it should be disconnected from the power supply.

Before final completion of installation work, it is recommended to check all joints for gas leaks. To do this, use soap foam, which must be applied to the connecting elements. If, when you turn on the gas, the soap begins to foam in some places, it means there is a hole there. Once the crack and leak are repaired, you can safely use the equipment.
http://www.youtube.com/watch?v=gZhAjE8tk2k
To summarize, we note that it is better to entrust the gas connection to the hob and oven to professionals. In this matter, it is important to take all precautions to avoid future emergency situations. If you decide to make the connection yourself, it is recommended to study the instructions for the equipment from the manufacturer. Also, study the advice of experts in detail. Only when performing installation work step by step, subject to safety precautions, gas equipment you can connect it yourself.