How to connect plastic panels with each other. Installation of wall panels do it yourself

In this article, we describe the process of installing panels with their own hands (PVC or MDF). The instruction itself is not considered difficult and can be performed by a person who has no knowledge in construction. The main thing is to do everything in terms of the walls so that the walls do not get curves.

Instruction

As rules, installation pVC panels It is executed on the reeed turning from Brosks with a volume of 50mm x 25 mm. Under the condition of suitable preparation of the plane, the panel can be attached to a person personally, or the ceiling with nails, bracket or glue. Bruks of the crates are mounted at a distance of approximately 0.5 m interspace by means of screws or gentlemen. If the panels become mounted horizontally, the bars are required to be vertically, and nobopot.

For a specific combination of panels, bars are required to be installed at the level. Installing panels comes from someone from the corners, in which the corner or the finishing of the plank is first attached. If the panels become covered with the wall before the ceiling, you need to install the ceiling plinth. Then we install the panel so so that the small strip of the panel has entered the corner.

After this panel is attached to the nails to the crate for the fastening strip. We mount the coming panel, closely undergoing it to the previous one, and besides the crepary to the crate. Installation lasts to close opening or angle, in these places you need to install angular or finishing components that are included with PVC panels. The final panel with a small force is inserted into the finishing component and snaps. Places of docking panels with floor closed by a plinth.

Facing the building with plastic panels - Meee Lock and Bowee "Unrepited" Method of Buildings. One of the main onset sides of the lands of the finishing mat-la is the highest manufacturability of installation. The assembly is carried out in analogous to the child's constructor and to cope with this task, including the amateur. Another advantage of this reception is the actual inaccessibility of any dirt, dust, waste and other "minor phenomena" when the repair is made with their own hands.

The plastic panels are cut along and across, as follows, in the investigation of the difficulties with the adjustment of the volumes of dashing should not be. Friend from Dudig, the lining is connected by the type "Paz-groove". In this form of the connection, the extending can not be similar to flourishing with panels or including the mirror.

Methods for fastening PVC panels

For fastening the PVC lining and the separation molding, use more successful reception for WAS. Below are the most famous attachment places. wall panels:

• self-storms - for fastening the wall panels, the drill for scratching the reply, although it can be done without it.
• nails - take on the enjoyment of nails with widro-haired and anti-corrosion coating. It is inconvenient that the perplex of the Cepete Plank is small and the fingers are guaranteed to you.
• fastening brackets - a well-worthless method of fastening wall panels, it will be necessary for a gun to make a pistol.
• adhesive compositions and a mixtured method, the reliability of attachment of PVC panels cannot be accurately promised.

When installing on the vertical plane, the crate for fastening the panels, pinch in a step less than 60 cm, when installing it, to avoid sagging, press the panel with a step less than 50 cm. Material is attached to the cleared and global set.

The installation process itself is not difficult and can easily be done with your own hands. Most often, the panels are mounted on wood crate, installed perpendicular to the direction of panels, nails, self-drawing or brackets with a stapler. If the walls are insulated - then the interface and panels are installed on each other: the parobarrier, thermal insulation, windproof membrane.

1. Previously need to find the direction of installation of panels, further strengthen the wood plane of wood rails at a distance of 30-40 Santim. Between itself perpendicular to the direction of plastic panels
2. Installation of panels comes from installation of obseccsyaars, profiles, external and internal ygl. It is nyzho to embed a peer panel in the groove, then we leave the gap of 5 mm in the groove. Now you need to make sure that the 1st panel is placed exemplary smoothly to the corner of the plane of the plane (use level or plumb) and attach the mounting edge of the panel to the slats (after 30 cm) at least some of the selected methods.
3. Insert the second panel to the limit in the groove 1 panel and attach its mounting edge as the same method as in 1 panel. Subsequent panels are attached similarly. The final panel must be shortened by 1 Santim. From the side of the edge of the edge and use it to pre-in the ending plane, then push it into the groove of the previous panel. The final panel is not fixed.
4. To mount to the plane of the suspension, you need to install an auxiliary crate in the places of their attachment, because The panel has the ability to withstand a lot of up to 1 kg
5. For cutting panel, accept the handwheel for metal or saw with napyady teeth.
6. It is not recommended to install panels at low temperatures (below 0С).
7. Powered and ppofili should be performed at no melee 10 degrees Celsius.
8. When leaving the panels, use a soft tank or sponge. In no case use abrasive or caustic cleaners. At the end of the installation for removing static voltage, the plane of the panels is recommended to be treated with antistatic.
9. In the course of operation, you will need to protect the panel from the udar.

Also, consider the following rules when installing PVC panels:

1. In case the plane is uneven, it will be necessary to assemble the vapors from the woods. Rakes need to be perpendicular to panels. It is advisable to make the distance between the rails - less than 0.5 m. When mounting the wall paneling in raw buildings, wood cage needed to be treated with a special supply. If the walls have a curvature, the cavity of the Intrusters this flaw.
2. ON CARM, YGLNNE or extreparate. To disguise the cuts of the panels down and door cuts, windows, etc., the starting prodigil. When connecting panels in length, a connecting profile is used. Ceiling plinths are used for the design of the joint block with a flow.
3. Installation of PVC panels with your own hands (installation of panels) is recommended to start from the corner. In shower, bathrooms, in wet premises we advise you to seal the compound of the compound of the pardon of Pprofil and Vagokanki. For sealing, use waterproof silicone or other similar sealant.
4. Box in the lining of switches, electrical outlet, etc., is performed using a building knife, hacksaw or jigsaw. First you need to make the marker marker markup.

For installation cases, you will need to have subsequent devices:

• manual electric saw with volcanic dice;
• electr Driving and drill with carbide notoppicks dowel diameter;
• hacksaw on wood or metal;
• electric screwdriver or screwdriver;
• construction level for alignment of cable cutters both in vertical and horizontal planes;
• straight rail;
• stuslo;
• shoe knife;
• scissors on the alloy;
• hammer and Dobochnik;
• furniture stapler (in the case of the use of connecting brackets with a depth of 10 mm);
• answer;
• pliers;
• staircase or stepladder.
• chalk, pencil;
• pylet;
• screwdriver or electric screwdriver;
• cord;
• corolnic
• good mood)

Judging by this instruction, we can safely say that the installation process does not require large knowledge in the field of repair. If you decide to do it yourself, then forward. The main rule just do not forget: one time will die - seven times a revenue.

Polyvinyl chloride panels (PVC), which are also called plastic "lining", are used to decorate walls and ceilings in rooms with elevated moisture levels. This material is used for the interior device on terraces, balconies, in the bathrooms, in the kitchen. In order to fulfill such work, it is not necessary to attract specialists at all. If you have the necessary tool and skills to work with it, it can be done yourself.

Advantages of PVC

This material allows you to quickly get a smooth surface at minimal costs. Installation is performed very easily: if necessary, fitting the strip in size, the lining can be cut with hand-hacksaw with small teeth or with an electrolovka. Polyvinyl chloride panels are a relatively cheap finishing material.

At the same time, the decorative qualities of them are very high due to a wide variety of colors and shades, in addition, their surface can imitate natural material, for example, marble. Mirror-gold and mirror-silver lining is manufactured.

Sanitary qualities of plastic lining are especially important: its surface is not a habitat of microorganisms and viruses. PVC panels are not damaged by insects-grillers and rodents. This material is easy to care for this material: in order to put it in order, it is enough to wipe the surface with a damp cloth. You can also apply chemical detergents, except for those that contain acetone. This construction material Does not accumulate static electricity, dust does not settle on its surface. Polyvinyl chloride does not exude unpleasant odors, does not allocate substances harmful to the human body. It is not afraid of water and temperature drops, inerton to most household chemicals.

Under the plastic clap can be hidden wiring, water pipes and other communications. If necessary, the insulation can be laid between the wall and facing material.

Before assembly work, it is not necessary to align the base (wall or ceiling), dismantle the old finish, which significantly simplifies repair work.

How to choose high-quality lining

Choose the lining should be in accordance with the overall concept of the interior decoration. At the same time, the color of the material should be taken into account, its type (PVC panels are different widths, seamless compound and with seam).

High-quality material should not have damage on the front surface (dents, scratches, influx). Decorative panels Do not have drawing defects on the front side. All panels must be smooth: To ensure that you need to connect a few bands into the lock. If the docking occurs the devices and does not see the curvature material is suitable.

It should be paid attention to the internal structure of the material: the more transverse jumpers in it - the more stronger.

Tools and fixtures required for installation

To bind the wall or ceiling with plastic clapboard, an electric drill or a perforator will be required (for fastening the crate), hand-made hacksaw with small teeth (or electrolovka), level of construction, plumbing, roulette, hammer (or construction stapler with brackets), construction pencil. A screwdriver, stublod and a capable knife can be useful. If it is supposed to fix the panels at high altitude - you need a stepladder.

Mounting Basic Information

Most often, the PVC panels are attached to a predetermined crate made of wooden rails or bars. The lamp is installed in terms of the level and is attached to the wall using a dowel-nail or self-tapping screws. It is very convenient to fix the braces with the help of a construction stapler: it greatly simplifies the work and reduces the timing of its implementation.

Choosing material for the crate, you should give preference to dry materials. If the rails are supposed to be attached to an external, cold wall, wood must be treated with antiseptic composition.

Oriented bars perpendicular to the position of the panels: if the facing material is installed vertically, then the doom is horizontally and vice versa. The distance between the rails is selected about 0.5 m. In addition to the materials of the tree, the metal profiles can be used for the crate device (if necessary).

When cladding the walls, it is important to monitor the observance of the vertical when installing the crate: it is necessary for the correct docking of the panels in the corners. Installation begins with any of the corners, where the finish plank or corner first is installed. If the panel should close the wall to the ceiling, then a special ceiling plinth is fastened. The panel is installed in such a way that its upper edge goes into the skirting groove.

Materials fastened to the cutting of nails using special brackets, but fixation of the lining without applying brackets is allowed. If the lamp is made of metal products - used screws for metal. After fixing the first strip, the following is pressed against it, and its keyboard part must be tightly into the opposite part of the neighboring PVC panel. So continues until the entire surface is faced. At the bottom of the wall, the floor is attached to the plinth.

If the surface of the wall is perfectly smooth, all the angles of the right shape, then the plastic lining can be glued directly on the wall. For this, "Liquid nails" are used: such adhesive on the back side of the panel is applied, which is then tightly pressed against the wall.

The correct installation of PVC panels with careful attitude and proper care will allow the material to serve for several decades.

Video installation of PVC panels.