Do-it-yourself trestle bed for a summer residence made of wood. We make trestle beds with our own hands: materials for work and manufacturing technology. Rustic prefabricated garden sofa

For reading 8 min.

Arrangement of a comfortable and ergonomic recreation area in an apartment or in a country house is one of the most important tasks during renovation. But ready-made furniture from stores, such as sofas or dining tables, often does not fit the space available to the owners. Of course, an excellent solution is to order a set of furniture in the workshop, so that every detail fits perfectly into the interior of the living room, veranda or gazebo. Does everyone want to pay huge sums of money for such a service? That is why this article will discuss how to create a cozy and comfortable place for the whole family with the help of a trestle bed with your own hands.

What is a trestle bed?

Traditionally, a trestle bed is a platform raised on legs that can be used as a lounger, sofa and even a dining area (if there is a small table-stand). Trestle beds are made of wood.

Initially, this piece of furniture appeared in the countries of East Asia. This is due to the fact that the floors in the eastern houses were either smeared with clay or stone, and therefore cold. The wooden trestle bed, on the other hand, allowed during sleep, rest and meals not to come into contact with the cold surface, but to sit on a warm mattress among soft pillows. Often, the design of the trestle bed was complemented by a wooden canopy or a fabric canopy.

In Russia, the idea of ​​using a trestle bed was adopted from the Mongols, but it was not accepted to eat on them - this piece of furniture was used exclusively as a bed. But modern fashion trends have revived the popularity of the trestle bed as a place for relaxation, tea drinking and eating.

What kind of trestle bed can be?

As mentioned above, often in the manufacture of a trestle bed, its simple design was supplemented with various elements such as awnings, canopies, etc. Now, with the availability of high-quality tools and materials, you can make an ergonomic recreation area from a simple couch even on your own.

So, the trestle bed can be:

• Open - that is, to represent an ordinary spacious lounger, raised above the ground or floor with the help of legs;
• With a canopy that protects people resting on the platform from rain, sun, etc .;
• With a canopy or a tent, the fabric of which will also protect the trestle bed from the sun, but also perform especially well as a decorative function;
• With drawers, shelves, a small ladder, seats, a table for a meal, etc. - with any additional elements for which you have enough imagination.

In addition, you can make such a trestle bed, which will be used either as a platform for gatherings with family and friends, or as a sunbed for sunbathing in the garden or as a sofa for a gazebo.

Within the framework of the article, we will dwell in more detail on trestle beds with awnings. There are many options for implementing such an idea, and you can easily choose exactly the one that is suitable for your room, veranda, gazebo or even a loggia. But first, let's talk about how to make the design of the simplest trestle bed with our own hands.

We make a trestle bed with our own hands

Since the trestle bed has a very simple design, you will not need any special materials and tools for its manufacture. Here is a list of what you need to prepare to work on creating a do-it-yourself lounger:

• Wood - you will need both bars and boards. It is possible to use plywood or chipboard;
• Protective primers and compounds for wood, varnish or paint, depending on your preferences;
• Saw or jigsaw;
• Drill, screwdriver;
• Fasteners (screws, self-tapping screws, corners, etc.);
• Roulette, level, building angle;
• Sandpaper or sander.

Read also: A bench with a storage box on the balcony - convenient and functional!

But it is important to remember that the primary condition for obtaining a high-quality result is the presence of at least basic skills in all the listed tools and working with materials.

So, the stages of making a trestle bed with your own hands:

1. Estimate the size of the trestle bed and its location in the room or in the free space where you plan to place it. After that, you need to take measurements using a tape measure.
2. Prepare a sketch of the future product.

To do this, you do not need to have artistic skills - you just need to sketch the shape and approximate aspect ratio, details of the trestle bed. After that, it is important to note the exact dimensions of all parts.

1. Prepare bars, boards and other materials for work.

First, they need to be cut exactly according to the dimensions that you indicated in the sketch. Observance of accuracy is perhaps one of the main conditions for creating an even and comfortable trestle bed. Plus, if you cut a few smaller pieces of wood, you just waste the material and money down the drain.

Secondly, wooden elements should be treated with protective agents against fungi, mold and insects already at this stage. This will allow you not to be afraid that a problem will arise at the joints and placement of fasteners.

1. Assemble the frame of the trestle bed.

The simplest option is a rectangular shape, but when assembling the seat frame, it is important to use an angle for checking. Further, the legs are attached to the frame - they must be strong enough to withstand the entire structure along with the people on it. It is best to play it safe and make them wider and thicker than to restore the broken structure later.

1. Assemble the seat.

The base of the structure is connected and reinforced with bars, boards, slats. A seat is hammered on top - just for it it is advisable to use solid sheets of chipboard or plywood if the trestle bed is planned to be small.

1. Install the collar on three sides.

The elements of the side are also attached to the base - vertical bars are connected with horizontal slats along the perimeter of the trestle bed from three sides (as an option, you can close all four sides with a side and leave only a small passage to the platform).

In general, after installing the seat, the trestle bed can already be considered complete. Now you can paint it, put a mattress with pillows on it, or leave it as it is. But such an element of furniture will not be comfortable and beautiful enough, so you should think about its "upgrade":

• In addition to the side, you can also install a base for a canopy or canopy. It is best that the vertical columns from the beams pass into the legs - then the structure will be the most durable;
• One of the sides can be closed with a semblance of a wall (in this case, chipboard or plywood are also great), and then organize niches or shelves in it. If the trestle bed is spacious enough, it will be possible to place small potted flowers, decorative items such as figurines or utensils for tea drinking on the shelves;
• In small trestle beds on verandas or loggias, it is advisable to install boxes for storing various little things or things. They are provided for in the design even at the sketch stage, and are hammered together with the base;
• If the trestle bed is planned to be used as a place for rest and dining in the fresh air, it is worth installing seats at the sides along the perimeter. They should be just above the level of the trestle bed itself. Usually, in this case, the platform is upholstered with soft material and covered with a beautiful fabric, while leaving space for installing the table;
• For the same purpose, you can also make a table in the center of the trestle bed. Alternatively, install it in a small recess, having thought over this element even at the sketching stage. But a removable and folding table will be much more practical, because then the trestle bed can easily be used for sleeping;
• To make it easier to climb onto a high platform, install a small ladder. This element of the trestle bed looks especially good with solid sides and a canopy.

And with your own hands ...

From Da

31.05.2018 09:10

And with your own hands

Nowadays, the most fashionable design is not purchased, but handmade. After all, personal space should make a unique impression - so why not make it memorable?

Home BNC offers 29 homemade furniture designs that can be made from junk, planks and scraps of fabric.

A fantastic wealth of materials combined with creativity will allow you to create furniture for your site that will delight you and your guests all summer long!

1. Picnic table.

A picnic table is a great occasion to bring the whole family together. This stylish table brings practicality to any yard.

It is easy to assemble from 40 × 90 mm boards. The table is made on a trestle frame with attached benches. For an experienced craftsman, this is elementary.

2. Summer hanging basket.

It is very convenient to sit in such a basket with a book. Canvas is stretched and sewn onto the metal circle. The basket is secured with sturdy straps.

3. Painted lattice bench.

This bench is ideal for a rustic porch. An experienced carpenter can handle the task without difficulty. The bench is painted white and processed for a vintage look. You can also put it at the entrance.

4. Hand-assembled stockade bench.

This charming bench is assembled from pallets. By design, it resembles a palisade. The two pieces cross over to make the backrest. Perfect for the garden, especially if you put it in the shade and put soft pillows.

5. Garden furniture "Cantina".

This sectional furniture is made from wooden pallets. You will need a lot of pallets, which are disassembled using a pry bar, after which the most suitable boards go to create a bench. And if you put the upper section on the hinges, then you get additional storage space inside.

6. Table and stools made of boards.

This stool is easy to make from old planks. The boards are laid in a crisscross pattern for a stylish look and greater stability. This stool can also be used as a stand or table. The table top is made of concrete slab, but you can come up with your own version.

7. Shelving on wheels made of steel and boards.

This shelving table on wheels is made of old planks and steel corners for durability. Wheels add practicality and make it easy to move the rack to the desired location. A great piece for your garden kitchen!

8. Outdoor table with built-in freezer.

This garden table has a handy bonus: built-in freezers. It is pleasant to sit at such a table on a hot summer day. Freezers are closed with lids when not in use. A comfortable table for family gatherings!

9. Fashionable wire basket table.

This is a simple project to transform a wire basket into a stylish side table. No power tools are required to assemble it, and the basket can be painted in any color.

The wooden countertop should be sealed and secured to the basket with cable clips. This piece of furniture can be easily assembled in half an hour.

10. Bench for the fire.

To make it easier to enjoy the fire, build such a comfortable bench. The boards are placed diagonally, giving it a unique character. You will save a lot of money by making a do-it-yourself bench, because the materials will cost you much less than the finished furniture.

11. Garden gazebo.

To make your yard truly memorable, build a garden gazebo. Guests will feel like they are in a tropical resort!

It will not be difficult for an experienced carpenter to build such a gazebo. Add an air mattress, soft pillows and bedspreads and you will experience true relaxation!

12. Tahitian trestle bed.

This trestle bed is another great way to turn your yard into a resort. The inclined shape is easily achieved with a miter saw. To make the trestle bed last long and look attractive, it is better to use cedar boards.

13. Garden chair made of bars.

This is a lovely modern style garden chair. It can be done using a variety of techniques, from gluing bars to gluing them with screws. Place a bold pillow on top for a chic accent color for your backyard and garden.

14. Sofa made of boxes and pallets.

Pallets are the ideal material for garden furniture. They are cheap, serve for a long time and fit perfectly into the now popular rustic style. The back of the sofa is made of boards of different lengths to make it unique. Decorate your sofa with pillows - and relax!

15. Hanging seat on ropes.

Hanging seats are a great alternative to a hammock for both kids and adults. It is a very sturdy chair made of sturdy canvas that hangs from a ceiling beam or a sturdy branch of a tree. The chair is hand painted and a pillow can be added for added comfort.

16. Dining table.

This homemade dining table is so beautiful that you shouldn't be ashamed to put it in your house too! Moreover, it is much easier to make it than it seems at first glance. The crossed legs are overlapped; the table top is manually cut with a herringbone pattern.

17. Bohemian corner.

Birch plywood makes a beautiful garden sectional sofa. It will not be difficult for an experienced carpenter to assemble it. The sofa is built on a sturdy pine beam and covered with plywood sheets.

The sofa has a low back in a modern style. It is a pleasure to spend sunny days on it!

18. Homemade garden furniture "Sundance".

This simple homemade sofa is a good way for the aspiring carpenter to move on to making more sophisticated furniture. It is quickly assembled from 40 × 90 mm boards. The wood is impregnated with a light gray stain.

This sofa allows you to seat more guests in your yard and gives your garden an attractive accent.

19. Prefabricated rustic garden sofa.

Combining stylish looks and easy assembly, this rustic garden sofa gives your garden a modern look. It is assembled from boards 40 × 185 mm and 90 × 185 mm. The length of the sofa can be adjusted to match the cushions.

20. Summer hammock.

The hammock adds style to any yard. This homemade hammock stand is assembled from pressure treated wooden blocks. It is much sturdier than store racks and will last you for many years.

Hang your favorite hammock on it - and swing for your pleasure!

21. Garden table made of pallets.

This homemade coffee table is very easy to assemble from pallets. It differs from similar tables with stained top, which gives it individuality. The table is equipped with wheels so that it can be easily moved around the yard.

22. Designer side table.

The concrete slab gives this table its strength and attractiveness. The concrete is waterproofed to give it a smoother appearance.

The base of the table is very easy to assemble. Commercially available decorative tiles can also be used in place of the concrete slab.

23. Garden screen made of pallets.

A screen is a convenient way to hide your yard from prying eyes, especially if you have neighbors. This chevron-patterned screen is stylish and practical at the same time. In addition, it can be used to fence off unattractive parts of the yard.

The easiest way to make such a screen is with a miter saw.

24. Savannah homemade garden furniture.

This hanging ottoman is designed for a single mattress. The back of the ottoman is decorated with soft, cozy pillows. It attaches to strong ropes and adds a southern charm to your porch.

Children will especially appreciate the ottoman. You can even sleep on it!

25. Round bench for a tree.

Make a bench around a large tree in your yard. Assemble the pieces individually, then secure them to the tree. This is a project for an experienced carpenter and will take a couple of days.

But such a bench will make your yard truly unique!

26. Summer trestle bed "Wave".

This unusual trestle bed is made in the shape of a wave. It combines the properties of a rocking chair and a chaise longue, and can accommodate two people in width.

A great addition to any garden to unwind on summer days! And if you put two side by side, you get a cozy corner.

27. Bed-lawn.

This grass bed will be the main topic of discussion for all your guests for a long time. It is made on the basis of a conventional bed, which is filled with soil and turf. It is a great addition for a garden that does not have a natural lawn.

It is convenient and pleasant to lie on such a "lawn". And the guests will be simply delighted!

28. Table set "Ibiza".

This resort style table is made from pallets. It is built on a sturdy base and the pallets give an unusual accent. The legs are also made of disassembled sanded pallets.

The table top is made of a regular pallet covered with tempered glass. You can paint the table in any color.

29. Corner bench with a table.

This charming corner bench includes a built-in table. This is a simple project for an experienced carpenter and will take a couple of days. Such a bench serves as an excellent decoration for the porch and increases the number of seats.

Do you know how to assemble furniture with your own hands?

Arrangement of a comfortable and ergonomic recreation area in an apartment or in a country house is one of the most important tasks during renovation. But ready-made furniture from stores, such as sofas or dining tables, often does not fit the space available to the owners. Of course, an excellent solution is to order a set of furniture in the workshop, so that every detail fits perfectly into the interior of the living room, veranda or gazebo. Does everyone want to pay huge sums of money for such a service? That is why this article will discuss how to create a cozy and comfortable place for the whole family with the help of a trestle bed with your own hands.

What is a trestle bed?

Traditionally, a trestle bed is a platform raised on legs that can be used as a lounger, sofa and even a dining area (if there is a small table-stand). Trestle beds are made of wood.

Initially, this piece of furniture appeared in the countries of East Asia. This is due to the fact that the floors in the eastern houses were either smeared with clay or stone, and therefore cold. The wooden trestle bed, on the other hand, allowed during sleep, rest and meals not to come into contact with the cold surface, but to sit on a warm mattress among soft pillows. Often, the design of the trestle bed was complemented by a wooden canopy or a fabric canopy.

In Russia, the idea of ​​using a trestle bed was adopted from the Mongols, but it was not accepted to eat on them - this piece of furniture was used exclusively as a bed. But modern fashion trends have revived the popularity of the trestle bed as a place for relaxation, tea drinking and eating.

What kind of trestle bed can be?

As mentioned above, often in the manufacture of a trestle bed, its simple design was supplemented with various elements such as awnings, canopies, etc. Now, with the availability of high-quality tools and materials, you can make an ergonomic recreation area from a simple couch even on your own.

So, the trestle bed can be:

• Open - that is, to represent an ordinary spacious lounger, raised above the ground or floor with the help of legs;
• With a canopy that protects people resting on the platform from rain, sun, etc .;
• With a canopy or a tent, the fabric of which will also protect the trestle bed from the sun, but also perform especially well as a decorative function;
• With drawers, shelves, a small ladder, seats, a table for a meal, etc. - with any additional elements for which you have enough imagination.

In addition, you can make such a trestle bed, which will be used either as a platform for gatherings with family and friends, or as a sunbed for sunbathing in the garden or as a sofa for a gazebo.

Within the framework of the article, we will dwell in more detail on trestle beds with awnings. There are many options for implementing such an idea, and you can easily choose exactly the one that is suitable for your room, veranda, gazebo or even a loggia. But first, let's talk about how to make the design of the simplest trestle bed with our own hands.

We make a trestle bed with our own hands

Since the trestle bed has a very simple design, you will not need any special materials and tools for its manufacture. Here is a list of what you need to prepare to work on creating a do-it-yourself lounger:

• Wood - you will need both bars and boards. It is possible to use plywood or chipboard;
• Protective primers and compounds for wood, varnish or paint, depending on your preferences;
• Saw or jigsaw;
• Drill, screwdriver;
• Fasteners (screws, self-tapping screws, corners, etc.);
• Roulette, level, building angle;
• Sandpaper or sander.

But it is important to remember that the primary condition for obtaining a high-quality result is the presence of at least basic skills in all the listed tools and working with materials.

So, the stages of making a trestle bed with your own hands:

1. Estimate the size of the trestle bed and its location in the room or in the free space where you plan to place it. After that, you need to take measurements using a tape measure.
2. Prepare a sketch of the future product.

To do this, you do not need to have artistic skills - you just need to sketch the shape and approximate aspect ratio, details of the trestle bed. After that, it is important to note the exact dimensions of all parts.

1. Prepare bars, boards and other materials for work.

First, they need to be cut exactly according to the dimensions that you indicated in the sketch. Observance of accuracy is perhaps one of the main conditions for creating an even and comfortable trestle bed. Plus, if you cut a few smaller pieces of wood, you just waste the material and money down the drain.

Secondly, wooden elements should be treated with protective agents against fungi, mold and insects already at this stage. This will allow you not to be afraid that a problem will arise at the joints and placement of fasteners.

See also: Wardrobe on the balcony - more ergonomics!

The simplest option is a rectangular shape, but when assembling the seat frame, it is important to use an angle for checking. Further, the legs are attached to the frame - they must be strong enough to withstand the entire structure along with the people on it. It is best to play it safe and make them wider and thicker than to restore the broken structure later.

The base of the structure is connected and reinforced with bars, boards, slats. A seat is hammered on top - just for it it is advisable to use solid sheets of chipboard or plywood if the trestle bed is planned to be small.

1. Install the collar on three sides.

The elements of the side are also attached to the base - vertical bars are connected with horizontal slats along the perimeter of the trestle bed from three sides (as an option, you can close all four sides with a side and leave only a small passage to the platform).

In general, after installing the seat, the trestle bed can already be considered complete. Now you can paint it, put a mattress with pillows on it, or leave it as it is. But such an element of furniture will not be comfortable and beautiful enough, so you should think about its "upgrade":

• In addition to the side, you can also install a base for a canopy or canopy. It is best that the vertical columns from the beams pass into the legs - then the structure will be the most durable;
• One of the sides can be closed with a semblance of a wall (in this case, chipboard or plywood are also great), and then organize niches or shelves in it. If the trestle bed is spacious enough, it will be possible to place small potted flowers, decorative items such as figurines or utensils for tea drinking on the shelves;
• In small trestle beds on verandas or loggias, it is advisable to install boxes for storing various little things or things. They are provided for in the design even at the sketch stage, and are hammered together with the base;
• If the trestle bed is planned to be used as a place for rest and dining in the fresh air, it is worth installing seats at the sides along the perimeter. They should be just above the level of the trestle bed itself. Usually, in this case, the platform is upholstered with soft material and covered with a beautiful fabric, while leaving space for installing the table;
• For the same purpose, you can also make a table in the center of the trestle bed. Alternatively, install it in a small recess, having thought over this element even at the sketching stage. But a removable and folding table will be much more practical, because then the trestle bed can easily be used for sleeping;
• To make it easier to climb onto a high platform, install a small ladder. This element of the trestle bed looks especially good with solid sides and a canopy.

You can think of any additional elements for the trestle bed yourself. This is especially true when the site is being built spacious enough to apply all the owner's imagination.

If you are too lazy to invent a trestle bed yourself, you can make it out of pallets.

How to make a canopy for a trestle bed with your own hands

The version with a canopy is especially suitable for those trestle beds that are planned to be placed on the street. Consider several options for how to install a canopy on a trestle bed with your own hands:

• The removable awning is perfect for summer residents who use the trestle bed only in the warm season;
• On high supports, you can stretch an opaque film, which will serve as protection for the trestle bed during rains;
• To create a solid trestle bed, a canopy made of corrugated board is suitable, which is usually used for carports in parking lots, roofs of open balconies, etc.;
• Dense fabric or tarpaulin stretched over a wooden frame is a more aesthetic option in appearance, but in this case there will be no protection from moisture and gusts of wind;
• The most original option is to put climbing plants on a wooden or plastic frame. In just one or two seasons, your trestle bed will become the most picturesque part of the site, and all guests will admire your ingenuity. But in this situation, you will have to suffer with rainwater and insects;
• If you decide to place the trestle bed in a living room or at least in a covered gazebo, then to decorate it, you can hang a canopy made of light translucent fabric from the ceiling. In addition, long pieces of material can be draped over the top frame of the trestle bed. Such decoration will give it oriental notes, and you will feel like in a fairy tale on the trestle bed.

In such a simple way, you can solve several problems of organizing a recreation area both in the apartment and in the garden at the dacha at once. We hope that the above options and ideas will help you realize your unique ideas, and your trestle bed will turn out to be comfortable and spacious in Russian, and chic in an oriental way.

An easy option for making a trestle bed:

balkon4life.ru

Do-it-yourself trestle bed: basic types of structures, complete for a summer residence and a living room

A great place to relax - we build a trestle bed with our own hands

The main types of trestle beds: photo

Open trestle beds

Trestle beds for summer cottages

Trestle beds with awnings

Step-by-step instructions for making a trestle bed

1. A link is created from three bottles. For this, the upper part is cut off and discarded from two bottles. and the lower parts from both sides are put on the whole bottle. Twenty-four such links should be collected.
2. Double-sided tape is applied to the sides of the structure. along which the rope is subsequently pulled. It should be laid in dense rows along the entire side of the product. The winding should start at the bottom and end before reaching the top a little (about five centimeters).

Trestle bed for living room with drawers for baskets

Step-by-step manufacturing instructions:

• first of all, you should make a drawing of the future sofa. focusing on the existing baskets that will be inserted into the plywood boxes of the sofa;
• to create such a trestle bed from materials, you only need plywood, the thickness of which should be at least twelve centimeters;
• three boxes are made of plywood on an individual scale;
• plywood boxes are painted in a color suitable for the interior of the living room and fastened together;
• baskets are inserted into the boxes, a mattress and pillows are placed on top. The trestle bed is ready, you can go to rest.

Trestle bed-transformer in oriental style

This design is rather complicated to manufacture, but multifunctional. From a berth, it can easily be transformed into a coffee table and vice versa.

Such a piece of furniture will come in handy in the country, it will easily fit into a small-sized apartment and will not interfere on the loggia if you put it there for outdoor recreation.

To make a transformer you will need:

• pine beams 175, 58.7 and 17.7 centimeters long;
• bolts and nuts;
• two pine planks 2x4x50 centimeters;
• one sheet of MDF 1.2x32x64;
• elongated washers;
• threaded rods;
• socket wrench;
• glue;
• stain;
• sandpaper.

Before starting work, you should decide on the size of the trestle bed.

Manufacturing technology of the structure.

1. The saw cuts pieces of the desired length.
2. On the extreme bars, the drilling points are marked with an awl.
3. Holes are drilled on the front side of the extreme bars. They should be deaf and three centimeters deep. Nuts and washers are inserted into the holes.
4. Holes are drilled on both sides, the depth of which should be about half the bar.
5. The "table top" is almost ready. Now two bars of 17.5 centimeters are glued together.
6. The ready-made legs are fixed to the beams of the "table-top" with clamps. You should get a structure pulled together by six rods.
7. Now the structure should be secured with paired beams so that it can support a person. The bars will connect the legs. To do this, drill each leg with a round drill. grease each hole with glue, insert screws into them and press the bars tightly against each other.
8. The surface and legs of the table are treated with sandpaper. After grinding, the trestle bed is painted and varnished in several layers.
9. Now the only thing left to do is to assemble the trestle bed and attach to it a back made of MDF sheet and two planks.

The trestle table made in oriental style is ready. It remains to put pillows on it and put it in a cozy place to rest.

So, without much difficulty, showing a little imagination and spending not so much time, you can make a wonderful place to relax with your own hands from almost any materials.

Kislyakova Natalia Andreevna

http://balkon.guru

legkoe-delo.ru

Gazebos with a trestle bed: ideas, photos, DIY making

Not in every culture, a gazebo is a place for a family dinner and relaxation "with a glass of tea" in a group of friends. For example, in some countries of the East, it is customary to drink tea in the gazebo, and the interior is equipped to match this ceremony. A non-standard option is to equip the recreation area with a trestle bed, which will be discussed below.

A trestle bed is a bed without a back, instead of which armrests are installed around the perimeter. He came to us from Eastern culture.

Serves primarily as a place for relaxation and conversation. Additionally, you can equip a table "Josa (China, round shape with a diameter of 30-40 cm)" and eat food.

Trestle-gazebo

Below will be presented several options for a trestle bed, which can be installed in a gazebo. The design of the "room" itself can also differ significantly.

With a light canopy

The trestle bed can be practically in an open space, the roof of which is a stretched fabric that protects from direct sunlight. This option is common in Arab and other eastern countries with warm climates, where it is practically never cool outdoors.

Pergola

The design in the form of a pergola is already more similar to a classic gazebo. Above, instead of a roof, several beams are laid, for example, from a bar of 150 to 50, which partially cover the interior from the sun. In most cases, they look very aesthetically pleasing and unusual for Russian dachas.

A pergola is a very beautiful structure that will decorate any summer cottage. You can see more photos in the publication about gazebos, terraces and pergolas.

Semi-closed structure

The trestle bed can be located inside a classic gazebo with a secure roof and a massive frame. In this case, the recreation area is completely rebuilt for a seated and recumbent format.

I cannot judge how appropriate this option is for a Russian family. However, if you honor Eastern culture and such a vacation is only a joy to you, then you can consider a similar option.

DIY ideas

The price of the finished trestle bed is about 30 thousand rubles. Not everyone will want to give that kind of money for such an attribute of furniture, so many will think about making it with their own hands. What materials are best to make? Of course, real trestle beds are made of wood.

1. We make the bottom harness, which will later be placed on the legs (you can use a 100 by 100 bar).
2. The harness, fastened to a half-tree, is installed on legs, which are inserted into the tree using a tenon connection into the nest.
3. Armrests are installed around the perimeter.

Fantastic wood carving

Very often, trestle beds are decorated with wood carvings, the complexity of which is assessed by category. The first is the most difficult and expensive. The third is cheaper and simpler. I suggest enjoying a few photos above and below this text.

Gazebos with a trestle bed: ideas, photos, DIY making Link to the main publication

besedkis.ru

It's nice to lie down after a hard day, reading magazines or just listening to music. And you don't have to do it on a bed or sofa. A do-it-yourself trestle bed can become a favorite place to relax. After all, you can put it not only in the living room of an apartment, but also in the courtyard of a house or summer cottage in the fresh air, or even in a sauna.

Trestle beds for summer cottages

A trestle bed under an awning can be organized in several ways:

• it is convenient to use removable awnings for summer cottages, since they are easy to remove when leaving;
• portable awnings - umbrellas are very convenient. In this case, the trestle bed is not tied to one place, if desired, it can be moved;
• if the awning is fixed on high supports, then it will protect a large area not only from the sun, but also from rain. They are also best made removable so that they can be stored indoors for the winter;
• sheds can be made with rigid structures by connecting them to the bases of the trestle beds. Structures can be made with openings from branches or reeds, and then they will serve only for shading;
• like a trestle bed, a quadrangular structure with a roof is used, which has a raised floor for a mattress;
• several trestle beds can be placed under a permanent canopy, thus organizing an outdoor recreation area for the whole family.

DIY options for trestle beds

To make the simplest version of a country trestle bed, you will need:

Step-by-step instructions for making a trestle bed

1. A link is created from three bottles. To do this, the upper part is cut off and discarded from two bottles, and the lower parts are put on the whole bottle on both sides. Twenty-four such links should be collected.
2. The three links are folded together and wrapped tightly with duct tape. There should be eight sections in total.
3. All sections are connected and secured with tape on all sides.
4. According to the size of the upper plane of the resulting plastic structure, rectangles are cut out of cardboard and foam rubber.
5. With special glue, cardboard is glued to the upper base and fixed with tape.
6. Double-sided tape is applied to the sides of the structure, along which the rope is subsequently pulled. It should be laid in dense rows along the entire side of the product. The winding should start at the bottom and end before reaching the top a little (about five centimeters).
7. On the walls, left without winding, strips of their fur fabric are glued. The width of such stripes should be six centimeters. To fix the winding, strips of fur are also glued along the side edges of the wound rope.
8. A flap is cut out of the fur fabric, the size of which should be seven centimeters larger than the cardboard base on each side.
9. The corners of the fabric are sewn up and the fabric is put on the foam rubber.
10. A few drops of glue are dripped onto the cardboard and the fur seat is glued. The simplest and most budgetary trestle bed for a summer residence is ready.

After a hard day, it's always nice to relax listening to music or reading magazines. This can be done not only on a bed or sofa, but also in a suitable place for relaxation, which can become a trestle bed. You can install it not only in the living room, but also in the courtyard of a summer cottage or a private house. Then outdoor recreation will become not only pleasant, but also useful.

Choosing a type of trestle bed

Before you make a trestle bed with your own hands, you must think over its design features. It can be in the form of a lounger, sofa or bed. In the first case, the structure is a structure with a wooden deck and a concrete or metal frame. The couch in the form of a sofa is usually free-standing or built-in. But if you make a trestle bed in the form of a bed, then it should be supplemented with a headboard.

Preparatory work before making a trestle bed

If you decide to make a trestle bed with your own hands, then you must first prepare tools and materials, among them:

• plastic bottles;
• Scotch;
• scissors;
• glue;
• cardboard;
• foam rubber;
• rope;
• needle;
• threads;
• artificial fur.

If the basis is plastic bottles, then 72 containers of 1.5 liters should be prepared. The tape should be simple and double-sided. When buying foam rubber, you should choose one that is 5 cm thick.

Step-by-step instruction

Before making a trestle bed with your own hands, you must think over its features. If bottles are the basis, then one link can be created from three products. For two bottles, the upper part is cut off, while the lower ones are put on the whole bottle. There should be 24 such links. Three are put together and wrapped with tape. As a result, you should get 8 sections. They are connected together and fixed with adhesive tape.

Having measured the upper plane of the plastic structure, you must prepare a rectangle made of foam rubber and cardboard. Using a suitable glue, cardboard is glued to the base and fixed with tape. On the sides, double-sided tape should be applied, along which the rope will be stretched. It should be laid in tight rows on the sides. The winding starts at the bottom and ends before reaching the top 5 cm.

Plating

If you decide to make a trestle bed with your own hands, then strips of fur cloth should be glued to the walls that were left without winding. The width of the strips should be 6 cm. To fasten the winding, the strips are also glued along the side edges. A flap should be cut out of the fur fabric, its size should be slightly larger than the cardboard base on each side. The allowance will be 7 cm.

The corners of the fabric are sewn up and put on the foam rubber. A few drops of glue must be dripped onto the cardboard to strengthen the fur seat. At this stage, we can assume that the budget trestle bed is ready.

Trestle bed made of boxes

If plywood sheets will be used for the work, then initially it is necessary to prepare a drawing. The thickness of the plywood should be 12 cm. 3 boxes are made of it. They are painted in a color that matches the interior of the living room. The elements are fastened together. Baskets should be placed inside, and pillows and a mattress should be placed on top. On this we can assume that the trestle bed is ready.

Making a trestle bed from wood

If you decide to make a trestle bed made of wood with your own hands, then first you need to prepare:

• bolts;
• bars;
• nuts;
• pine planks;
• washers;
• threaded rods;
• glue;
• socket wrench;
• sandpaper;
• stain.

The design will turn out to be multifunctional. It can be slept on or converted into a coffee table. The piece of furniture will come in handy in the country and will easily fit into a small apartment. The trestle beds also do not hurt on the loggia, where you can relax in the fresh air.

Manufacturing technology

If you decide to make a trestle bed with your own hands, you should first consider the photo. They will allow you to determine the design features. Using a saw, cut pieces of the required length from the material. Drilling points are marked on the extreme bars. On the front side of the extreme bars, holes should be drilled, which should be blind and have a depth of 3 cm. Nuts and washers are inserted into the holes.

Holes must be drilled on both sides, deepening half of the bar. On this, we can assume that the tabletop is ready. Making a trestle bed with your own hands, at the next stage you must glue two bars, the dimensions of which are 17.5 cm. The legs are fixed to the bars with clamps. This will allow you to get the structure tightened by the rods. It is fixed with paired beams so that the trestle bed can withstand the weight of a person.

The bars will connect the legs. To do this, holes are drilled in each of them, the inside of which is lubricated with glue in order to insert the screws. The bars are well nestled against each other. The surface of the product and the legs of the table are well processed with sandpaper. After sanding is completed, the base is painted and varnished in several layers. The trestle bed will only have to assemble and fix the MDF back and a pair of slats to it.

Features of making a trestle bed from chipboard

Before making a trestle bed for a summer residence with your own hands, a photo of such a design must be considered. The images will help you figure out which material is best to use. An alternative solution is chipboard, which can be plain or laminated. The dimensions will depend on the area of ​​the room and its layout.

Approximate dimensions may be limited by the following dimensions: seat depth 70 cm or less, backrest height 40 cm or more. The covers of the trestle bed are fixed to the rear walls with the help of piano hinges. Soft elements of the back and headboard can be made of polyurethane foam, while the covers are removable, in which case zippers are sewn into them.

Finally

The trestle beds can be supplemented with an awning. In this case, the structure is installed outdoors. The canopy can be made removable, because it will be easy to remove when you leave. Mounting can be carried out on high supports, then the site will be protected from the sun and rain.

Sometimes awnings are made rigid. They are connected to the base. The structure, if desired, can be made of branches or reeds. Such a roof will act as shading.

Comfortable couch for a beauty parlor

Often times, couches are found in hospital reception rooms and treatment rooms. But this is a versatile piece of furniture that can be used in the country - supplement it with side racks, throw a canopy on top - you get a beautiful, cozy place for outdoor recreation.

Do-it-yourself street couch in the country from pallets

In the kitchen, the couch will create additional seating space, and if you equip it with shelves, it will be where to store various kitchen utensils.

Kitchen couch with padded seat and additional storage space

In the hall, such furniture will be especially useful for people with back ailments, because it is not for nothing that doctors recommend them to rest on a hard surface.

Fashionable and stylish red couch in the living room

Having shown imagination, such a nondescript accessory can be turned into a real masterpiece. The do-it-yourself couch will fit perfectly into your interior and it will not be difficult to make it.

Do-it-yourself comfortable and practical wooden couch

Depending on individual needs, location and availability of free space, couches can be of different sizes: large, small, medium, straight and angular. They can be equipped with additional shelves or drawers, made with or without a backrest, sheathed with fabric or leatherette - such a piece of furniture will not go unnoticed and will be your pride.

Small sofa couch, do it yourself for the living room

Special movable massage couch with adjustable height

• with or without an armrest;
• with or without a back;
• on thin and thick legs;
• soft couches;
• completely upholstered in fabric or leather.

Backless couch with decorative bolsters

The main types of couch models:

Varieties of medical couches with a metal frame

• with a metal frame;
• with drawers;
• with additional shelves;
• folding (can be transformed into a sleeping place).

Convertible couch, easily allows you to transform the bed into a sofa, sofa or armchair

Choose a couch model that will not only perfectly fit into the interior, but will also be available for you to manufacture. If you have some carpentry skills, you can tackle more complex product options. If you are mastering this kind of activity for the first time, first make a simple model.

Simple couch in the kitchen with an extra bed, made by yourself

Advantages of a DIY couch:

Handmade wooden bench for a comfortable stay on the balcony

• low cost - you will have to spend only on the necessary materials;
• organization of additional space;
• structural reliability;
• manufacturing according to the required dimensions;
• combination with the interior;
• elegant appearance.

Beautiful children's room with a daybed for relaxing

Making a couch with your own hands is not difficult; you do not have to be a professional carpentry. The most important thing is to think carefully about all the details, make a plan, precise drawings (they can be found on the Internet) and select quality materials.

Drawing for making a couch with your own hands

Ordinary wooden blocks are suitable for the frame; it is better to give preference to natural wood. But you can also use chipboard. To make the product softer, use a mattress or foam rubber. Upholstery fabric will give a beautiful appearance to this type of furniture.

Beautiful leather bench in the hallway, made by hand

How to make a couch with your own hands?

Please note that all wooden elements must be sanded with sandpaper, painted, and then varnished. Therefore, immediately decide on the desired color of the future product. When the first layer of varnish is dry, you can sandpaper the details again - all the small chips sticking out will harden, and it will be easy to get rid of them.

Wooden couch with a soft mattress and a raised part for the convenience of procedures

If you want to make the product soft, use a universal and cheap material - foam rubber as a filler. Choose a medium hardness, as too soft will sag, and hard will bring discomfort. Cut the foam rubber a few centimeters more - it must be fixed at the bottom of the parts to prevent premature wear of the upholstery.

Foam rubber for softness

In order to sheathe the product it was easier, follow this scheme of actions: first fix it in an unstressed state to one long side of the part, then pull and fasten from the center of the opposite side to the edges. Follow the same sequence with short ends.

The process of fixing the upholstery fabric in the corners

The best option for the headboard lifting mechanism would be the step fixation, popular in the models of old clamshells.

Headboard lifting mechanism - step fixing

Please note that a device for a sofa or ottoman will not work in this case - due to the small size of the lever, you will have to make great efforts to lower the headboard.

You can choose a two-position headboard, the work of which is ensured by gas microlifts with a force of 40N-80N.

Legs from a bar for the future couch

For the legs of the structure, cut the bar into pieces of 50 centimeters; for the rest of the parts, you need to prepare plywood with the following parameters:

• for a bed 170cm * 70cm;
• on the headboard 38cm * 70cm;
• two long drawers 200cm * 17cm;
• four short drawers 56cm * 17cm.

Short tsars are fixed between the long ones. In long ones, do the same, but in a plane with a diameter of 8 mm. Place one short sidebar in the interval 40 centimeters from the head of the bed.

The legs are attached with 4 * 60 self-tapping screws. In order to avoid the formation of cracks in the wood, drill holes with a diameter of 5 mm in the drawers, and 2.5 mm in the legs.

We fix the legs with self-tapping screws

Along the perimeter of the box, in addition to the headboard, screw the corners to fix the bed. If the couch will be equipped with gas shock absorbers - attach them as well, following the supplied user manual.

Twist the bed to the corners of the box, stepping back 5 centimeters from the foot and on the sides. Set the butterfly hinges at the headboard, then in the lowered, horizontal position, place them under the bed and secure. It remains to fix the counterpart of the gas lifts and the couch is ready with your own hands.

Product decoration

Unusual cable bed-bed

For decoration, you can use only paints and varnishes, various synthetic, microfiber, dermantine or velor - it all depends on your taste and budget. Synthetic upholstery keeps color and shape for a long time, but it tends to become electrified and attracts dust.

Massage couch with wooden legs and upholstered

The couch will have an interesting appearance if you drill holes in the plywood and pull the filler with nylon thread. The holes will be hidden with beautiful buttons covered with matching fabric.

Using the couch for relaxation, massage and treatments

Video: Couch with bedside table