Cladding vulture panels outside and inside the building. Interior decoration of the walls of the house from vulture panels with photo and video

27.05.2018

At the present time, the construction of SIP houses using Canadian technology is developing at a tremendous speed.

The construction of such buildings is carried out in a short time, in about 3-6 months, depending on the size, complexity of structures, finishing materials and number of storeys. With the help of SIP panels, both residential and industrial ones are currently being built, and also that allows not only to save time and financial costs, but also to obtain high quality finished objects, which fully meets all the criteria of modern construction.

What do SIP panels look like?

Such panels are completely new, technologically advanced, versatile, environmentally friendly, and also a fairly reliable building material. They are two special OSB boards, between which there is a layer of polystyrene foam, which serves as a heater. Due to the use of the latest manufacturing technologies, OSB boards combine environmental friendliness and special strength.

Benefits

The reason for the popularity of this technology is the presence of a number of advantages compared to other materials:

Lower construction costs. A house built from SIP panels is much lighter than a stone one, so there is no need to make an expensive foundation.
Availability of high quality and energy saving properties of panels.
The indisputable advantage of the SIP panel is the price. The cost of one piece, depending on the area, ranges from 2500 to 3500 thousand rubles.
Quite simple installation that does not require additional lifting equipment. All panels are easy enough to lift and install manually by workers.
Such a building requires minimal costs for finishing work. The surface of the walls, corners, ceilings and floors, which are built from SIP panels, are even. Due to this, much less materials are needed for surface finishing and funds for wages of workers.
The speed and ease of construction of construction projects.
Houses made of SIP panels are more durable, stronger and more reliable.
SIP panels do not deform compared to other materials.
Installation can be done at any time of the year.
It is an environmentally friendly material.

And this is just a small list of the advantages of houses built using SIP technology.

from SIP panels

All materials for the assembly of Canadian and frame structures are manufactured at the factory, therefore, after the installation of the house, all the walls, as well as the ceiling and floor, are perfectly flat. The internal SIP panels are very diverse, since they have practically no restrictions. The only thing that needs to be done is to prepare the bases of the surface for further finishing, since the OSB sheets are made with a peculiar relief texture. And, as a rule, no finishing is applied directly to them. If you wish, you can leave the natural appearance of the surface, just covering it with a layer of paint or varnish in order to protect it from moisture and dust. However, such a technique would be contrary to fire safety standards. In addition, communications, such as electrical wiring, will need to be placed on top of the plates, and this does not look very aesthetically pleasing.

Wall decoration

There are a huge number of options for interior decoration walls. There are practically no restrictions on the use of finishing materials, which is a great advantage of SIP panels. They create a completely flat vertical surface that does not require leveling with plaster and is suitable for any finish. If you wish, you can perform high-quality painting of the walls, paste over them with wallpaper, sheathe decorative panels, wood or drywall.

Plasterboard wall decoration

Drywall is considered one of the most recognized materials for the interior in SIP-panel houses. This material is a sheet consisting of two layers of cardboard, in the middle of which there is a layer of hardened gypsum with fillers. It is an environmentally friendly material that does not burn and does not contain harmful toxins. It is very convenient to use drywall. It is an ideal option that is suitable for finishing the premises. This material is easily putty, primed, painted and pasted over with wallpaper. It has a low price tag. In addition, the installation of drywall sheets is easy to install. With its help, the interior decoration of the house can be done by hand. The installation process is so simple that even a beginner can easily handle it.
The finish is also fairly simple. The joints are closed with a masking net, then sanded and puttyed. Everything, the walls are ready for any finishing works.

Wall painting and wallpapering

The easiest way is to paint the walls. You just need to choose a paint that matches the color and texture, and the interior of the room will look completely new.

Another, no less common option, is the decoration of the interior walls of the house with wallpaper. Due to their wide selection, it will not be difficult at all to choose the right ones that match the taste and preferences.

Wall decoration with decorative stone

A more complex and costly method is the interior decoration of houses from SIP panels with decorative stone. This is a rather original way to transform and decorate the interior of a room. Due to the use of modern technologies, it is possible to very accurately simulate the complex structure of granite, basalt, etc.

For the hallway or hallway, porcelain stoneware, cork wallpaper or laminated wood-like panels, as well as natural ones, are very good for wall decoration wood materialssuch as lining, plywood, veneered chipboard, etc. In rooms with a significantly increased level of humidity, ceramic tiles and plastic finishing are an excellent option in all respects.
In the bathroom, a moisture-resistant drywall is used, on which tiles are later glued.

In addition, the interior decoration of houses from SIP panels is made of lining, wood, plastic, MDF, etc. It all depends on the desires of the owner of the house and the designer's fantasies.

A private house. Interior finishing of ceilings

Ceilings of premises made of SIP panels, like all other surfaces, do not need to be leveled, which greatly simplifies the work on their decorative finishing... At the moment, many modern technologies are used. The most commonly practiced finishing with plasterboard, especially in cases where it is required to create multi-level ceilings with hidden lighting.
An excellent option is stretch ceilings, which can be either monochromatic or refined with photo printing. The most economical way is finishing with polystyrene foam ceiling tiles.

Floor finishing

Any material can be used for flooring: floorboard, laminate, linoleum, panel parquet or parquet board, floor tiles, carpet, etc. One of the advantages of SIP panels is that they are warm, for this reason the question of additional insulation before finishing. In rooms with a high level of humidity, it would be most advisable to make self-leveling floors, having previously completed a cement or polymer screed. You can also lay ceramic floor tiles.

SIP panels, the price of which is very affordable, are high-quality and reliable material. The construction of such houses is a great alternative to traditional buildings.

Houses made of SIP panels, after the completion of the construction phase, seem almost ready for life. And yet, before entering such a house, you need to carry out a number of mandatory work:

interior wall decoration with plasterboard,
wiring and connection of electrical equipment,
carrying out plumbing works,
ventilation device.

All these works are necessary for a normal and healthy life in a new home. The Second House company offers a complex and quick solution to this problem.

First of all, you need to understand why these works are necessary at the first stage.

Plasterboard wall decoration - the basis of fire safety and subsequent finishing

The timber frame of the building and the self-supporting insulated wire panels are combustible materials, and although fires very rarely occur in the walls themselves, the walls must be protected from the penetration and spread of fire. To do this, you can use any non-combustible material: gypsum plasterboard, gypsum fiber boards, gypsum fiber board, fiber cement or glass magnesite sheets of LSU. GCR of these materials is the cheapest. For reliable protection and high-quality finishing, it is advisable to sheathe in two layers, and it is necessary to sheathe not only the walls, but also the lower surfaces of the floors.

Drywall is also an excellent base for finishing. It is perfectly putty, primed, painted and pasted over.

Sheathing needs to be done directly to the surfaceOSB, of which the SIP-panel consists. At the same time, electrical lines are divorced.

External electrical wiring - the basis of safety and heat saving

In houses made of SIP panels, the solution is unambiguous: the electrical wiring should not be immersed inside the SIP. This is dictated not only by the norms of electrical work in wooden houses (in the West, electricity is often conducted inside SIP panels), but also by the need to maintain a sealed thermal circuit.

Fortunately, plasterboard or similar trims allow outdoor electrical wiring to be created in an inconspicuous way.

For this, wires in a corrugation, cable duct or in double insulation are carried out strictly vertically in a layer of drywall.

In the case of complex finishing we do this simultaneously with the plasterboard wall cladding.

Plumbing work in SIP houses

Our company has developed standard water and sewage distribution schemes adapted for SIP houses. Before concluding a contract, we approve detailed project work on the "VK" section, which guarantees both us and the customer that we will get exactly what we expected.

The project is free for the customer. At the same time, such problems as water quality and filtration stages, volume of consumed water, distribution along risers, etc. are immediately solved.

Ventilation in a modern home is the foundation of health

The house is made of SIP panels, like most high-quality modern houses, requires good ventilation. Many architects, when designing houses with insulated walls and sealed glass units, still focus on natural supply ventilation... It only shows low level domestic architectural qualifications.

Breathable walls in the Russian climate can only be created for summer wooden houses or for houses with a huge energy consumption by modern standards (roughly speaking, where it blows from everywhere).

For a healthy life, the air in the house must constantly circulate from the external environment to the living quarters (bedrooms, living rooms) to technical (kitchens, bathrooms, boiler rooms), from where it must be removed, preferably without loss of heat. Residents must adjust the flow rate depending on whether the space is being used or not.

A good ventilation system can be both expensive and relatively cheap. In the first case, the system is controlled automatically and retains heat well; in cheap options, you spend more energy, because there is no heat return, and must regulate the supply ventilation themselves.

Our company has real experience in installing various types of ventilation in houses from self-supporting insulated wire and we are ready to implement it in your home.

Complex interior finishing - saving you money

Complex finishing works are beneficial not only for the customer, but also for our company. We create a single project, optimize transport and overhead costs, do all the work in a single schedule.

Therefore, when combining works, we always offer a discount and additional bonuses: free installation of a shield or a fan pipe.

Contact our specialist and ask him all the questions that you already have. Choose the form of communication: by e-mail or by phone. Leave your coordinates and we will contact you.

SIP panels are a wide selection of modern building materials that have a multi-layer structure. Panels are used in the construction of houses using Canadian technology. The panels are based on OSB particle boards. A layer of expanded polystyrene is located between them. When the installation of the panels is over, you have to take care of the external finish, which would not be affected by weather conditions and have an attractive appearance.

If you decide to use SIP panels for building a house, then you must first decide on the choice of material for decoration. Today, no problems should arise with this, since there is a wide range of these products. But what a ventilated facade looks like, and how you can install it yourself, this will help you understand

A rock

Using this construction material, it is possible to execute outer skin houses. They use a stone for partial finishing of SIP panels or for facade works... By its structure and colorist a natural stone differs, but this does not affect the characteristics of the structure in any way.

Decorating a house from vulture panels with stone

The advantages of the stone include: a low level of heat conductivity and excellent performance of sound and heat insulation. But how the stone facing tile is used, you can see

Eco-friendly block house

The facade of a house made of SIP panels is often decorated using wooden lining. The decoration is very similar to a log cabin, because natural wood is used for its manufacture. The block house is based on a rounded log, and its sides are cut from 4 sides. Houses built from SIP panels and finished with a block house gain strength and reliability.

But what is the design of the facade country house, and how to choose what you need, you can see

On the video decorating a house from vulture panels with a block house:

Plaster

This option for finishing the facade is considered the most popular. And this is not surprising, because this material has attractive view and at the same time its cost is low. There are several types of plasters used for the facade: silicate, cement, acrylic and silicone.

On the video, decorating a house from vulture panels with plaster:

As for the disadvantages, cement plaster does not have such a wide range of colors. Silicate plaster remains the next most popular. It is perfect for facade decoration. It is based on only natural ingredients that are linked to each other using liquid potassium stele. The disadvantages of this material include the high cost. But how to put lighthouses under plaster, and how to do all the work, this will help you understand

Facade from DSP

The front part of the house, made of CBPB, is a cement slab containing shavings and chemical additives. The advantages of this material include size. House cladding does not carry anything complicated. This business will take you several hours. In addition, this material is environmentally friendly. In its composition there are no harmful additives, it is easy to cut, and it also does not lend itself to the influence of weather and fire.

On the video finishing of a house made of vulture DSP panels:

OSB panels

This option for decorating houses is considered modern today. This is OSB based siding. It is less brittle compared to fiber cement siding. In addition, it does not lend itself to the influence of temperature extremes, which cannot be said about vinyl siding. In the photo - OSB-based siding:

House facade decoration from OSB vulture panels

You can use this version of the material instead of the wall, since the panel design assumes the presence of an external wall and siding at the same time. To give the finish an original look, you can paint the material in any color you like. To create a rich and luxurious finish, the type of material in question is imitated under a tree. And here is what houses from metal sandwich panels look like, you can see

How to install

The cladding of the facade of the house from SIP panels originates from the installation of the first plank. It needs to be fixed around the entire perimeter of the house on the crate. The procedure is as follows:

Attach the first plank with screws with a pitch of 30 cm. At the same time, you need to take care of a 5-6 mm gap between the sections of the initial punks, which is fixed evenly and strictly horizontally.
Set the outer corner at the junction of two walls, and use screws for fastening. Screw them into the corresponding and existing grooves on both sides. After that, be sure to make sure that the angle setting is correct.
External corners can be presented in various types and differ in size, shape and installation options.
After the outer corners have been installed, you can proceed to the installation of the panels on the facade.
The installation process runs from left to right. Installation of the first panel is carried out flush into the corner of the first plank. For fixing it is worth using screws.
The next strip is installed in the bracket of the previous panel. Thus, a chain of front panels of the first row is formed.
Each subsequent row should start from left to right and after the first row of planks. Next, the second and further rows are built in.
The exterior cladding of a house from SIP panels can be carried out with various facade panels. If you use the transition from one type to another, then for these purposes you will have to use the platbands. In this case, they will play a decorative role.

But how the facade cladding with porcelain stoneware occurs, and what you should pay attention to during the work, this

On the video, the exterior decoration of the house from vulture panels:

SIP panels - an innovative approach in the construction industry. The houses thus obtained are distinguished by their pleasant appearance and high durability. But the finishing touch is the exterior finish. For this, various materials can be used, each of which differs in its operational and decorative qualities.

Carrying out the interior decoration of a house from SIP panels practically does not differ from similar work carried out in a building erected from another building material, but before starting work it is recommended to look at photos of various options for such a finish.

In a house assembled from, it is inappropriate to use wall decoration only with the help of a lime-sand mortar. Interior decoration of a house from SIP panels can be done using any finishing material... There are a huge number of options for finishing this type of structure. As a rule, the technology of work is much simpler in this case than in a building built, for example, from brick or other building material. There are different types of finishes, the choice of which depends on the materials that are used when closing the wall cake from the inside.

Before starting work on the interior decoration of a house from SIP panels, you should understand and understand what this building material is, and what advantages and disadvantages it has.

These panels are a new high-tech, environmentally friendly and reliable building material. Such a building panel consists of two special OSB panels, between which a layer of expanded polystyrene is laid, which acts as a heat insulator.

This material has recently become increasingly popular. The reason for this is the presence of a whole range of advantages over other building materials.

The main advantages of SIP panels are as follows:

The relatively low cost of SIP panels in comparison with other types of building materials.
Manufacturing technology allows us to produce high quality building material with excellent energy-saving properties.
Low overall financial costs for construction work when using SIP panels.
Simplicity of installation work. The construction process does not require the involvement of heavy equipment.
Minimum costs for finishing work. In the process of installing the walls, the surfaces are perfectly flat with right angles.
High speed of building a house.
Houses made from this material are strong and durable.
SIP panels are not subject to deformation during operation.
Building assembly work from this material can be carried out at any time of the year.

In addition, the building material has a high degree of environmental safety... For SIP panels, the release of toxic chemical compounds harmful to the human body is not typical during their operation.

After the construction of the building, the interior decoration of the house from SIP panels is carried out. Today, there are several types of various finishing building materials that can be used for these purposes.

When carrying out from SIP panels, materials are used:

stone of artificial and natural origin;
block house;
lining made of various types of wood;
lining made of plastic;
ceramic tile;
plaster with decorative properties.

Each of these finishing materials has its own advantages and disadvantages, as well as features of the installation work.

Decorative plaster for interior and exterior decoration of houses from SIP panels does not cause problems, since this material has been used in finishing works for a long time and is very easy to use. Modern formulations decorative plaster are very resistant to temperature influences. This material is durable, practical and has an attractive appearance.

A limitation in the use of this finishing material is only the imagination and the owner of the house. Modern manufacturers offer developers a wide color range in the color of the material.

Decorative plaster has a large list of advantages, the main ones of which are the following:

high degree of wear resistance and resistance to temperature fluctuations;
external appeal;
high vapor permeable characteristics;
high moisture resistance characteristics;
high indicators of durability of operation of the finish.

The material does not deform when exposed to sunlight and high temperatures.

This building material is produced in several versions, different in composition.

Plaster based on silicone and silicates is most often recommended for outdoor use, although it can also be used for interior decoration of houses from SIP panels.

Mineral plaster is a sand-lime mixture. This composition is absolutely harmless to the human body, but is most often used when carrying out exterior decoration buildings. When using decorative mineral plaster, the surface is matt.

The use of a polymer composition or a composition based on acrylic when carrying out interior decoration of a house from SIP panels makes it possible, as a result of finishing operations, to obtain a surface with a gloss.

Application features for finishing panels made of plastic

Plastic lining has become widespread as a finishing material due to its low cost.

This material has a number of advantages that make it popular when carrying out finishing work. The main benefits are:

resistance to sunlight;
strength and reliability of a structure capable of withstanding sufficiently large loads;
surface resistance to external pollution - the finishing material does not absorb dirt;
resistance to temperature fluctuations and fluctuations in humidity in the surrounding air.

The material is offered to the consumer in the form of strips with special locks at the end. This design feature of the plastic lining makes it easier to install the finishing material indoors.

The material is lightweight, which is a significant factor in choosing it along with its low cost. Installation of plastic lining is carried out on a special crate, which is pre-fixed on the surface of the walls and ceiling. In some cases, fastening the lining is allowed directly to the SIP panels. The use of plastic lining allows you to get a high-quality home decoration at a relatively low cost of purchasing material.

Use for finishing works of ceramic tiles and drywall, finishing bare SIP panels

Most often, ceramic tile is used when finishing the floor. Ceramic tiles are very easy to install, the finishing material is characterized by the lack of the ability to absorb dirt that accumulates on the surface. The tile is very resistant to moisture and low temperatures. Ceramics are able to withstand significant physical exertion, retaining their original properties for a long time.

Finishing bare SIP panels using paints and varnishes is one of the simplest finishing options. Painting work can be carried out directly on the panels; before painting, there is no need to plaster the surface of the panels. Before carrying out paintwork, it is only necessary to prime the working plane and the seams between the elements of the wall structure. The walls are primed and putty, after which a layer of the selected paint and varnish composition is applied.

If you use an acrylic-based paint composition in the finishing process, you can get walls with an uneven effect. When using this type of finish, OSB does not lose its attractive appearance. In the process of finishing work, you can use sheets of drywall. The use of this material for decoration improves the fire safety characteristics of the building base. Drywall is an excellent material for post-processing and finishing.

Installation of finishing material can be carried out directly on the self-supporting insulated wire panel or on a special crate, which is pre-fixed on the surface of the walls. On top of the mounted gypsum plasterboards, wallpaper or paint is applied. This finish allows you to get beautiful, perfectly flat wall planes, which in the future makes it easier to paste wallpaper and decorate the room.

I like

Vulture panels allow you to build a house in a fairly short time. This method of construction appeared relatively recently, but it is already very popular among professional and private developers. One of the most important advantages of using vulture panels is the ability to build a house with your own hands as soon as possible and without the involvement of professionals.

This material in professional circles has another name - it is sandwich panels. By their design, they are quite simple and are thermoplastic polystyrene located between two slabs of solid wood.
The main functions of polystyrene are to provide thermal and acoustic insulation. Panels are different in thickness, their width depends on their functional purpose.
The choice of a panel in terms of thickness should primarily be based on the appearance of the building, features of its design and subsequent operation.
A significant advantage of using sip panels is that no gaps are formed, therefore they provide a high level of thermal insulation of the object.

Advantages of sandwich panels

The technology of constructing buildings from vulture panels is not without reason very popular. This external cladding material has a number of significant advantages over other building materials such as blocks and bricks. Among them are the following characteristics.

Cold protection

A brick house will be almost 5 times colder than one built with vulture panels. The design of the material allows you to keep heat inside the building and keep cold out. In winter, in such a house, the climatic conditions are warmer, and in summer, on the contrary, cooler. Such facing material can withstand temperature differences from -50 ° C to +50 ° C.

Endurance and reliability

The construction of vulture panels is very durable and can withstand a transverse load of up to 2 tons per square meter, and a vertical one - up to 10 tons.

Construction speed

Building a house box from panels of this type will not take as much time as building ordinary house using other materials. The building has an area of \u200b\u200b150 sq.m. can be finished within 3 months.

Environmentally friendly materials

Sip panel is an environmentally friendly cladding for buildings for various purposes, so it does not harm the environment and people living in it.

Strength and durability

Fire resistance

Vulture panels are reasonably fire resistant. During a fire, they will not support combustion due to specially made make-ups for this. For 1 hour due to the fire, the plates will not collapse. This approach usually negates the fire of the drywall of the interior decoration of the building, and saves the situation of throwing fire on neighboring trees and buildings.

Sound insulation

Polystyrene does not allow air to pass through, which is why external noises do not enter the room and do not go beyond it. In such a house it is always very cozy and quite quiet.

Saving construction costs

Building a house from vulture panels will cost about 2 times cheaper than a brick one. And building your own house is much more profitable than buying a city apartment. In addition, there is no need to build a solid foundation and use additional equipment, since the panels are light enough and can be moved manually. Due to the high level of thermal insulation for heating, you can also save a considerable amount of money per month. Delivery of material may even cost free or for a small fee compared to the amount required for shipping other, heavier materials.

Cons of sip panels

There is no material that does not have shortcomings in principle. Therefore, even such a cladding as a structurally insulated panel has its drawbacks. For example, device ventilation system considered the main and most significant gap in this case. But this minus is more likely a special feature of exploitation than an categorical negative quality.

However, there are also some unjustified disadvantages. These include the following points.

If the panels are protected from fire from the inside, the material cannot boast of such a thing from the outside. But since fires often start from the inside of the house, and not outside, it is difficult to call this fact a full-fledged disadvantage.
There is a theory that mice can settle in the panels, but it has not a single factual confirmation.
Some professionals argue about whether such panels are really environmentally friendly, but one has only to remember that meat is also wrapped in expanded polystyrene packaging and doubts are dispelled.
Some builders believe that it is impossible to achieve good sound insulation without additional noise reduction. If you think about it, neighbors in a private house are not expected, therefore, in any case, there cannot be much noise.

Choosing a foundation for a house from SIP panels

When choosing the basis for a private type structure, you need to remember that an expensive and too massive foundation is not needed at all. When selecting it, it is necessary to take into account the small weight of the house box, soil characteristics, climatic conditions and the passage of groundwater at the building site.
The most the best views foundation today are rightfully considered:

columnar type;
monolithic from reinforced concrete slabs;
screw-pile type;
tape shallow type.

The biggest dangers can arise when planning construction in the spring. The foundation can rise to the ground, causing the house to crack.
In any case, when choosing a foundation, the price for it is approximately 20% of the total cost of building a house as a whole. The cost is not too small, but it is better not to save on the foundation - repairs will cost much more.

Planning of floors of a house from SIP panels

Multi-storey buildings built using sandwich panels are very easy to erect due to the modular design of the material itself.
The walls on the ground floor must be covered with a prefabricated slab. One more floor can be built on its plane, and on it - and so on. The most important point is a reliable fastening of all elements located in different directions.
The overlap should not allow the walls to collapse, but then the problem of protecting the end appears.
The easiest way is to cover the panels with a crown made from a board. The cut array must be placed at the top of the wall. Then on the edge it is necessary to install another similar board, attaching it to the crown using self-tapping screws.
It is best to collect this piece on the ground. It must be attached to the embedded beams, which are located on the inside of the panels, as well as to the frame posts.
Next, you need to install a system of beams over the crown. The floors themselves must be held together with jumpers. It is important to remember the offsets in each of the rows. After the completion of the installation work, you can start laying the insulation and filing the rough ceiling on the lower floor.

House decoration from vulture panels

Almost any decoration of a building built of structurally insulated panels can be done, including even the most budget types. It is possible to apply this finish coating directly to the panels. In this case, you will not need to use grids and canvases.

However, it is important to pay attention to strengthening the interpanel joints. To do this, you can use carbon fiber or fiberglass, which should be impregnated with polymer type glue.

Exterior decoration of the house from vulture panels

Cladding from the outside is quite simple. The exterior decoration of a vulture panel house is more important than interior decoration. It provides not only a decorative function, but also a protective role.
It must be remembered that walls are always exposed to environment... Even sip panels over time, due to such influences, begin to slowly collapse.
The durability of the finishing layer determines the strength of the facade, as well as its durability. The properties of the protective materials play an important role. The material must be highly resistant to mechanical and chemical influences, atmosphere and fire.
The decorative function also plays an important role. Its expressiveness will depend on the selected color and texture of the cladding for finishing the building.
Some types of materials have the properties of creating additional layers of heat and sound insulation.

Variants of exterior decoration of a house from vulture panels

Exterior decoration of a house made of vulture panels is different types... The main ones include the following types:

plaster;
block house;
lining;
siding;
front panels;
painting;
clinker tiles.

For block house finishing you need oak, linden or ash wood. It is necessary to remember about the need for special processing, which is needed to protect against external factors.
Siding looks like plastic panels of various colors and shades. This type of exterior finish allows for another layer of heat retention.
Facade panels can be made from:

plastic;
stone;
wood;
metal and other materials.

Thermal panels are the most popular. They perfectly fulfill the function of protection and temperature control. In addition, there are many different style options for such finishes.
Wall painting, like plaster, is the simplest and most inexpensive type of decoration. This type of work is carried out in a rather short time compared to the rest of the finishing work.
When choosing a paint, you need to choose the right type of paint. It can be different, but much will depend on the surface that is being painted.
In popular types of paint, you can define the following:

for painting plastic;
for painting wood;
for covering metal surfaces;
soluble in water;
organic solvent based paint.

Clinker tiles are one of the most suitable methods for finishing the exterior of a building. Its properties and characteristics are best suited for the cladding of buildings made of vulture panels. It is made from white clay. It perfectly tolerates frost and humidity, and is also resistant to temperature fluctuations.

Exterior decoration of the house from vulture panels with plaster

Many modern builders stop at the choice of plaster for the facade of the sip panels. This finishing layer of a building comes in different types and is popular for a number of the following reasons:

prices for materials for plaster are not too high;
the finish is of sufficient quality;
high-quality plaster withstands adverse external influences;
such a coating does not require special skills when finishing;
her style characteristics are very high.

Can be distinguished the following types plaster sip panels:

based on acrylic: this type has a high level of moisture resistance, resistance to ultraviolet rays and is an environmentally friendly material;
decorative polymer: it is quite durable and has a high resistance to damage;
mineral type: its main component is cement, therefore it is easiest to work with this type;
silicone look: such a surface is capable of self-cleaning, lasts long enough, is very elastic and is close to glossy coatings;
silicate plaster: this type of decoration is rarely used and is one of the varieties of liquid glass.

Stage-by-stage exterior decoration of a house from vulture panels

Cladding of buildings from vulture panels takes place in several main stages.

Formation of cost calculation. You need to select the material and decide on the type of installation. The necessary calculations are made on the basis of these data.
Purchase of the required amount of selected material. It is important to take into account all the design features of the project.
Preparing walls for cladding. Based on the selected type of finish, the surface of the walls must be brought in a certain order. You may need a primer or even the installation of an additional profile system.
External insulation. After completing the preparation of the surfaces, it may be necessary to install another insulation layer from the outside of the walls.
Carrying out direct installation of finishing with outside building.

The appearance of their home is very important for almost all people. Therefore, before choosing materials and works, you can study a lot of various photo materials in online construction magazines that will help you decide on the choice of exterior decoration of a house from vulture panels. They clearly show how this or that type of finish looks like, depending on the selected material.

Exterior and interior decoration of the house from vulture panels

Prices for finishing the facade of a building made of vulture panels are relatively low. They depend on the material chosen for this. The cheapest option is to plaster the outer part of the sip panels and paint them.
All other materials for creating the finishing layer are much more expensive and may require additional costs for additional design details. At the same time, the quality will remain relatively the same, and the cost of such exterior decoration of a house made of vulture panels will increase significantly.
As for the inside of the building made of structurally insulated materials, then before starting the cladding from the inside, you need to grind all the joints of the sandwiches.
It is important to sheathe the walls with plasterboard, and only then proceed directly to putting things in order and beauty.

A house built from vulture panels is in many ways more profitable than a structure erected, for example, from monolithic slabs or cinder blocks. This option is more affordable, retains heat well and keeps cool, and is also easy to install.