How to mount plastic slopes on the windows. Sucks to installed plastic windows with your own hands: video and installation instructions

Slope- This is part of the window opening, framing the window throughout the perimeter. The slopes are the final stage in the installation of windows and give them a complete elegant appearance. When replacing windows in your apartment or house, you need to consider that the thickness of modern plastic windows is less than thickness wooden windowsinstalled in building a building. After replacing the window on the internal slopes around the perimeter of the window remains an unprocessed stripping strip from 5 to 30 cm depending on the building structure. Sucks After installing the window, you need to be processed so that the opening has a complete view.

The slopes must be installed the day after the gaps of the gaps between the wall and the window block when the mounting foam clarifies. Some of the species: plastering, from prefabricated materials (plasterboard, plastic panels).

Watching slopes.

When choosing shutter plastering, it is better to use gypsum dry plaster. It refers to quick-drying, is stirred by a construction mixer. To be applied with a thick layer, in contrast to cement-sand, which is important if there is a deepest potholes in old slopes.

The sand is mixed with the cement mixture at the calculation of ½, if necessary, applying a layer greater than 3 centimeters. So the hardening will happen much faster. Outdoor slopes must be treated with a facade starting putty to the water-repellent additives. If this plastic windows, Before plastering, you will need to conduct and thermal insulation. Otherwise, in the cold season, the glass will foggy.

The plaster is applied by several layers, each layer after applying requires drying. At the first stage, point applying (cape), then applied soil in 2 layers. At the end of the finishing layer. The next layer of the mixture is applied only after complete drying of the previous one. After that, the surface is spacked, getting rid of irregularities. If you need to apply another layer of putty, then the previous layer is necessarily soaked. The last layer is the finishing, finishing putty. When drying, it becomes lighter. The next step is grinding, it is carried out with a grinding machine.

The remaining gaps are filled with sealant leaving painting. The junction seat is cut by 2-3 mm by a stationery knife at an angle of 450. The resulting recess is so ground. With the help of a gun, the surface is covered with a sealant so that the groove is completely filled. The strip of sealant should be as smaller. For this cause greater tape. The sealant is flattered with a small rubber spatula, after that the painting ribbon is removed.

The finished slope is applied to the brush to prevent from cracking. The last step will be staining, this can be carried out using solvent-based enamels. But recently applied acrylic paint. The decoration of slopes takes place in two layers. The second layer is applied after complete drying of the first. All these stages will take about a week.

Watching window slopes

Consider two methods of slips from drywall.

Glue drywall slopes.

The easiest option is to glue the Cut-cut parameters, which are glued directly to the basic slope. True, this method requires some preparation of the foundation: the slopes must be cleaned from the old coating (paint, plaster, whitewash, etc.) and be quite smooth. Only in this case the material will be able to stick well to the base.

To glue the GCC, use special glitter for drywall (you will find it in any construction store). The glue is applied to the base of the discovery not throughout the area (solid layer), but point: the distance between the places of application of glue is at least 100 mm. If we apply a solid layer, the glue will dry for a long time.

Important!If you decide to glue drywall slopes, check the vertical and horizontal of each slope element. The horizontal slope after gluing is fixed with the struts that are installed on the floor or the windowsill. They can be dismantled in an hour! Full of glue dries after 1-2 days. Only after that put the holes on the sides are embedded.

Installing slips from drywall on the frame.

The first stage, a marker of the final position of vertical and horizontal slopes is made, then the thickness of the plasterboard is subtracted and another position is noted - for fastening the guide profile. Guide profile attached around the perimeter window Rama (except for its lower part) by self-drawing to its very edge. Same metallic profile Basic dowels to the base surface. For mounting profile to the windowsill, self-tapping screws are used for metal 25 mm long.

Elements from GCC cut over measured sizes are mounted on the frame using 9 mm of self-tapping screws. Before installation, it is desirable to strain the mounting foam interior Sloves - between the base wall and GKL. After that, the side of the slopes, as well as the plasterboard mounting location for the framework, is put off. Next, the surface of the slopes is ground and painted.

Diaspot from plasterboard

Suns from PVC.

With the help of roulette, you need to measure the length and width of slopes. Taking into account this data from the sandwich panel, three bands are cut: the upper (parallel windowsill) and two side.

On the size of the slopes, the starting profile is cut, in the context, it is attached to the letter P. it is attached using self-tapping screws exactly along the edge of the window profile. The distance between the screws is about 10-15 cm. At the same time, the profile should be installed at the top, the side elements are supplied to the upper, not leaving the gaps.

The top panel is inserted into the starting profile already fixed by self-plugs. After that, 4 more parts of the starting profile are cut off, the length of which is determined by the width of the slopes. Segments are triggered in the side starting profile at the top and bottom on both sides, fixed by self-drawing to the top of the panel sandwich and to the windowsill, respectively.

Next, we attach the guides for the side slopes from the sandwich panels. Next to the fixed from three sides (along the window opening, at the top of the panel sandwich and downstairs on the windowsill) of a kind of design from the starting profile is set to the panel sandwich bar. Similarly, the process of working with the panel on the other side is completed. As a result, the plastic slope is almost ready, and it remains only to give the appearance of the outer cut.

To impart a complete type of plastic slope use "F" profile, or as it is also called, the lid of the slope. The profile is cut into the stripes of the desired length, based on the following calculations: the length of the slope + the profile width for the side parts and the length of the slope + 2 profile widths for the upper slope.

It is advisable to leave the length greater than is required, as in the end, the excess will do anyway, but the lack of even one centimeter will require complete alterations. Next snap down the lid of the slope on the cut edges of the panels sandwich. In the corners at this stage, the outer bands are located.

Using a ruler and a pencil, the section is planned, according to which excess edging is cut off. As a result - neat straight angles.

* Possible installation of slopes using a sandwich panel without applying the starting profile. In this case, the lanes of the panel sandwich are becoming close to the window profile for 1 cm deep into a step-by-step fossi of the niche for fixing the slope. This process is more laborious than the use of "P" profile, but the result is more aesthetic.
* At the request of the joints of the jacks are processed with liquid plastic. But you can do without it.
* Most of the masters specializing in these species finishing work, exclude this stage. In this case, the lanes of the sandwich - panels are simply adjacent to the upper strip and to the windowsill. The clearance in places of compound is closed by a special means of liquid plastic, which, hardening, acquires the same characteristics as ordinary plastic. There are also negligent workers who use ordinary sealant, and after a short time, the slopes lose the appearance: joints treated with sealant are darker and polluted. Any of these two ways reduces the time and consumption of materials, and has its supporters and opponents. Therefore, the choice of option is a matter of taste.
* If a finish is planned for only one slope in the panel house, in order to reduce costs, the bands of the desired size can be purchased from the company - seller, without buying a sheet of sandwich - the entire panel.
* For many slopes installers, this stage is the final. However, it is preferable to fill the niches between the sandwich panels and wall of the mounting foam. For this, "F" profile prepared for installation temporarily dismantle. Fill the emptiness foam, the excessive excess, and the slopes ("f" profile) are neatly cut off ("F" profile) to its locations. Thus, additional warmth and noise insulation in the apartment is created.

Installation of PVC slopes

Slopes from laminate

When replacing windows, in order to save funds, you can stripping slopes on plastic windows with your own hands: video with nuances of this process will help do it without problems. However, what material to choose for installation and how to fix it on the slopes plane, you need to know for sure.

• 1 than you can stripping off on plastic windows with your own hands: video and description of materials
  • 1.1 Slopes from the sandwich panels do it yourself (video)
• 2 Distinctive signs of slopes from various materials
  • 2.1 How to launch the slopes of the window (video)
• 3 Step-by-step instruction devices of slips from drywall do it yourself
  • 3.1 Dugs from drywall do it yourself (video)

What can be seized on plastic windows with your own hands: video and description of materials

Today, it became an ordinary thing to replace windows on plastic structures, having excellent heat retention indicators, fence from street noise, and besides aesthetic and presentable appearance. The features of the installation of plastic windows involve a complete dismantling of old window blocks, in the process of which the entire decoration of the slopes is often destroyed. Therefore, after completing the work, we remained to see the unattractive picture of the mounting foam sticking out from everywhere and falling off from the disassembled plaster.

The decoration of slopes will re-produce different ways. The main thing is that the following goals have been reached:

• aesthetics;
• practicality;
• convenience in care;
• heat efficiency.

Whatever material is not used, the breakdown of the slopes must be made high quality and timely. After all, many are tightened with it, allowing moisture to penetrate these places, forming fungus there and attracting other unpleasant consequences. If you yourself know how to work with your own hands and manage with a tool, then you will not be difficult to see the slopes on plastic windows with your own hands. Video with instructions for each material there are many. We will look at the three most popular ways to finish slopes: plaster, plastic and plasterboard. WITH outside The windows still use metal elements.

Slopes from sandwich panels do it yourself (video)

Distinctive signs of slopes from various materials

The oldest and proven way to finish the slopes indoors is their plastering. Today, building stores are replete with a large number of diverse plastering mixtures. The main advantage of plaster is its low price and the ability to apply any paint or finishing with other facing materials. But you should not try to do it yourself, if you never placed. Before making a smooth surface itself, a long workout is needed in less complex areas, for example, on the walls.

The most convenient for the installation of slopes is plastic. Wall panels It has different color and sizes, which allows you to make the necessary choice without any problems. In addition, there is a whole set of corners and other details that allow you to make a sufficiency in the best way. The advantages of plastic are: absolute surface evenness, ease of installation, a huge variety of decorative design, impermeability for moisture, the possibility of replacing a separate element without dismantling the entire design.

Cost wall plastic panelswhich are used to finish slopes, is small and suitable for the execution of low-budget repairs. Its combination with plastic window blocks is just perfect. There are no pronounced shortcomings from PVC panels.

For exterior decoration The slopes of the windows are used by the details of galvanized steel coated with a polymer film with a dye. Most often they are used on facades closed with metal siding. These details are specially made for decoration of slopes on plastic windows with their own hands. Video installation of metal parts for slopes perfectly illustrates the entire process from the beginning to the end.

Corrosion resistance and an attractive appearance play a decisive role in choosing this material to finish slopes outdoors. Metal slopes They have a slightly worthwhile value than all the other their types.

A very popular step is the decoration of slopes with plasterboard sheets. For this purpose, moisture-resistant plasterboard are chosen, since window slopes Traditionally, they are considered places with high humidity. Condensate is always formed on the windows, and such sheets are very resistant to it. Of course, it is possible to use conventional drywall sheets, but then they must be pre-laminating to the primer or treat with moisture-protective solution. Heat resistance, excellent insulation and sufficient stiffness of sheets, allow you to use them without any concerns in order to finish window slopes.

Plasterboard is the cheapest material from all listed, not counting plaster. If it is damaged, it can be easily repaired, simply sailing to the dent putty and crate. If the humidity of the air inside the room is high, then the water pairs are absorbed by drywall, and with a lack of moisture, they stand out into the ambient air, producing a kind of cycle.

The one who ever made the slopes from drywall do it yourself know that this material is afraid of excessive moisture. Already 75% of its maintenance in the air can bundle sheets into components. In addition, the damage to the slopes is not so rare. After all, there is enough unscrewing effect so that the leaf is broken or a dent appeared on it. Another "illness" of this material is that different stains appear on it over time, which must be periodically painted.

How to launch a slope (video)

Step-by-step instructions of devils from drywall do it yourself

Consider a Read more of the process of decoration of slopes with plasterboard sheets. Note that there are several ways to fasten inside the window opening:

• on top of a wooden or metal crate. Such a method is used in the event of a decoration of this wall with plasterboard completely;
• using mounting foam;
• by gluing glue or putty.

Since the mixture method is the most common, then we will describe it step by step:

• we prepare the surface under the finish. To do this, outraged all the extra foam, cutting off with her with a knife. Slices of plaster and various contaminants remove, after which we take a vacuum cleaner and remove dust from the entire window opening. The entire plane of slopes are processed by the primer, in the way close up of cracks and potholes with the help of plastering composition. Plasterboard sheets are treated with moisture resistant. This will make it difficult to penetrate the moisture and the formation of molds there;
• plasterboard sheets are measured strictly in size and cut blanks with a sharp knife. The length and width of the slope is subject to measurement. When cutting, it is necessary to take into account the angle of slope of the slope plane relative to the plane of the window. Cutting the sheet follows the same angle so that the details are fixed more reliable;

• to window block And the windowsill with the help of self-tapping plastic starting strip are fixed. The width of its clearance should be equal to the thickness of the sheets. Most often it is 1 cm;
• the assembly is started from the upper plane of the opening. The edges of the panel are well missing glue. The width of the sticky layer should be at least 2 cm. One edge of the panel is inserted into the guide strip, and the second with force is pressed to the slope plane. Similarly come with all three panels. At the same time, the side is inserted into the guides that are screwed to the windowsill. All pairing parts are treated with sealant;
• the finished surface of the slopes is processed by putty twice or even three times for better quality. After drying it, gripping the entire plane. Sucks are ready for finishing. They can be painted with any dye or shine with wallpaper.

Qualitative design of slopes on plastic windows with their own hands, video options of which you need to see, is crucial not only in the attractiveness of the entire window opening for the gaze, but also for efficient heat saving in the apartment.

In order to set the window, it is not enough to simply mount it. You still need to make slopes. This is called the gaps from the window frame until the outside of the wall.

They are internal and external. The first of them are located indoors, and the second - outside the window. We will look at the internal version of the slopes and gradually study the process of their creation.

Types of slopes

Plaster slopes

Their main advantage is affordable price. But, at the same time, they have a number of flaws.

They are as follows:

• over time, cracks appear on the plastered surface;
• under the influence of sun rays is lost color;
• due to the shrinkage of the house, such a design can at all separate from the wall;
• for a long time of installation - This is due to the fact that you need to apply several layers of plaster. Each of them must dry carefully and only after that the next one is applied. Then the surface is covered with primer and stains. As a result, the whole process takes one or even two weeks;
• for even application of plastering composition requires the existence of such work skills.;
• there is no heat insulation - Because of this, condensate will inevitably perform in the case of hypothermia on window windows.

Ducks from drywall

Compared with plaster products, the following advantages have:

• more durable;
• with the presence of a heater in the form of mineral wool, show good thermal insulation properties.

There are disadvantages:

• the lack of waterproofing is due to the fact that the plasterboard is very afraid of moisture. Therefore, such slopes can only be installed in rooms with moderate humidity;
• for their installation, it is necessary to have a certain qualification and experience;
• requires priming and staining.

Plastic slopes

Plastic products are rightfully considered optimal. They are very practical: quickly installed, do not burn out and perfectly clean. The service life is at least 15 years. The most spectacular is their combination with plastic windows.

In such slopes there is insulation. Mineral wool is usually used as it. It prevents not only heat loss, but.

The problem of how to make slopes on plastic windows is quite solved. It can cope with her homemade master. Let's consider this process in stages.

Installation of plastic slopes

Stage First

On the entire perimeter of the slopes are attached rakes. They are recorded using self-tapping screws. During installation, it is necessary to ensure that the edges of these wooden elements do not go beyond future slopes.

Tip!
As long as all installation work is finished, do not remove the protective films from the windows.
This will help protect the windows from pollution and scratches.

In addition, the verticality of the attachment should be observed. We check it with the help level.

For alignment purposes, you can apply small wood blanks. They should be fixed in areas of irregularities.

The resulting design will create a robust framework, to which we will subsequently attach the plastic panel. Its necessity is due to the fact that plastic itself is quite flexible and it needs to give additional rigidity.

Stage two

Go to the next point of our story about how to make window slopes. At this stage, the starting strip should be installed.

We start with markup. Take a pencil and construction level and draw up the top horizontal on the frame. Then we spend the left and right vertical feature.

After that, attach starting strips. To do this, we use self-drawers. Strips fix exactly along the lines.

Tip!
In the installation process, you should pay attention to the fact that the plastic lies tightly to the frame.
Otherwise, the slots will remain, which will spoil the entire appearance of the window opening.

Stage Third

Mount your hands the F-shaped strip. But at first it needs to crop correctly. To do this, we apply the labels exactly in the height of our slope. Unnecessary part cut off.

Now fix the F-strip. Let's do it with the help of a construction stapler. Confirm one of two plastic ribs to a wooden rail. The remaining space to the second edge will take the edge of the inserted panel.

It should be noted that the F-element is good in that it eliminates the need to luxury wallpaper through the perimeter of the window opening. This plastic band will close all defective places.

Stage fourth

In the photo - installation of plastic panel

Now you need to install the panel by putting on them. At first, insert the plastic element to the starting strip, fixed in the rear of the opening.

Tip!
Accurately measure the sizes of the panel.
Otherwise, it may not fit on the slope.
Or, on the contrary, the gaps will remain between it and the other plastic elements.

Then under the panel put the layer of mineral wool. Putting it evenly along the entire length of our product, insert the second edge of the plastic in the F-shaped strip.

Thus, we make slopes on the windows not only beautiful, but also insulated. In addition, we note that in addition to thermal insulation, such a design also provides optimal conditions for preserving the material from which the walls are made.

And it is not surprising. After all, we obtain a closed, hermetic environment.

After completing the specified work, just one action will be performed. This sealing seams. The instruction for its conduct is quite simple.

You need to take a tube of sealant and insert it into a construction pistol. Cutting the tip of the tube, proceed to work.

We carry a small layer of sealant to all the places of contact with each other, with a window sill and with the window itself. After that, the process of creating sloping elements can be considered complete.

Output

The slopes on the windows can be made of plaster, drywall or plastic. The first two ways have significant drawbacks.

They are associated with the complexity of the installation process and the need to have skills on the installation of such products. In addition, plaster elements are deprived of thermal insulation properties, and drywall - waterproofing.

More practical are plastic slopes. They are more durable and easier to install them. In addition, it provides heat and waterproofing. About how to properly do the slopes on plastic windows, it was described in detail above.